Hostname: page-component-586b7cd67f-dlnhk Total loading time: 0 Render date: 2024-11-25T18:38:06.840Z Has data issue: false hasContentIssue false

Growth of Ferroelectric PbZrxTi1-xO3 (PZT) Thin Films by Liquid-Delivery Metalorganic Chemical Vapor Deposition

Published online by Cambridge University Press:  26 February 2011

Serhiy Matichyn
Affiliation:
[email protected], Otto-von-Guericke University, Institute of Micro and Sensor Systems, Universitätsplatz 2, Magdeburg, N/A, N/A, Germany
Marco Lisker
Affiliation:
Edmund P. Burte
Affiliation:
Get access

Abstract

In this study lead zirkonat titanate (PZT) thin films were deposited using direct liquid injection metal organic chemical vapor deposition (DLI-MOCVD).

The chemical states and the stoichiometry of PZT-films were characterized using X-ray photoelectron spectroscopy (XPS). The crystal structure of the films was investigated by X-ray diffraction (XRD).

The surface composition of the films was Pb : Zr : Ti = 1.05 : 0.52 : 0.48, which indicates that the deposited films had a stoichiometric PZT composition. 130 nm thick PZT films deposited on Ir showed <110> preferred orientation.

The main role for formation of the perovsktive PZT films plays the content of the lead in the deposited films. Lead deficiency causes the formation of the pyrochlore phase with poor electrical properties. In films with a significant excess of lead a second PbO phase appeared that can be observed even with naked eyes. Negligible excess of lead can be reduced by post-deposition annealing at 500-600 °C.

The Ir/PZT/Ir capacitor showed large values of the remanent polarisation of about 60μC/cm2 at an applied voltage of 3 V. So high value of the remanent polarisation can be induced by structural stress in the films. After ten switch impulses the values of the remanent polarisation have significantly decreased. This is probably due to a relaxation of crystal cells.

Type
Research Article
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Tsukada, M., Mushiga, M., Watanabe, J., Cross, J.S., Jpn. J. Appl. Phys., Part 2 41, L1312 (2002).Google Scholar
[2] Yokoyama, S., Honda, Y., Morioka, H., Oikawa, T., Funakubo, H., Appl. Phys. Lett., 83, 2408 (2003).Google Scholar
[3] Kim, K.T. and Kim, C.I., Surface and Coatings Technology, 177–178, 774778 (2004).Google Scholar
[4] Goux, L., Xu, Z., Kaczer, B., Groeseneken, G. and Wouters, D.J., Microelectronic Engineering, 80, 162165 (2005).Google Scholar
[5] Kohlstedt, H., Mustafa, Y., Gerber, A., Petraru, A., Fitsilis, M., Meyer, R., Böttger, U. and Waser, R, Microelectronic Engineering, 80, 296304 (2005).Google Scholar
[6] Moert, M., Schindler, G., Hartner, W., Kasko, I., Kastner, M. J., Mikolajick, T., Dehm, C., Waser, R., Integr. Ferroelectr., 30, 235 (2000).Google Scholar
[7] Liang, C.S., Lee, Y.H., and Wu, J.M., Journal of Crystal Growth, 283, 390396 (2005).Google Scholar
[8] Park, C.H., Son, Y.G., and Won, M.S., Microchemical Journal, 80, 201206 (2005).Google Scholar
[9] Chen, Z., Zeng, Y., Yang, C., and Yang, B., Materials Science and Engineering: B, 123, 143148 (2005).Google Scholar
[10] Lu, J., Chu, J., Huang, W., and Ping, Z., Sensors and Actuators A: Physical, 108, 26 (2003).Google Scholar
[11] Shimizu, M., Fujisawa, H., Niu, H., and Honda, K., Journal of Crystal Growth, 237–239, 448454 (2002).Google Scholar
[12] Lee, J.H., Rhee, S.W., Electrochem. Solid-State Lett., 4, F1 (2001).Google Scholar
[13] Gardiner, R.A., VanBuskirt, P.C., Kirlin, P.S., Mater. Res. Soc. Symp.Proc., 335, 221 (1994).Google Scholar
[14] Lee, D.J., Kang, S.W., Rhee, S.W., Thin Solid Films, 413, 237 (2002).Google Scholar
[15] Matichyn, S., Lisker, M., Silinskas, M., Burte, E. P., Proceedings of EUROCVD-15, The Electrochemical Society, 857 (2005).Google Scholar
[16] Wang, Z., Jiang, Q., White, G. S. and Richardson, A. K., Smart Mater. Struct., 7, 867873 (1998).Google Scholar