Hostname: page-component-586b7cd67f-t8hqh Total loading time: 0 Render date: 2024-11-29T07:26:55.307Z Has data issue: false hasContentIssue false
  • English
  • Français

Growth and Structural Characterization of Sr2TiO4: Chemical Control Over the Terminating SrTiO3 Surface.

Published online by Cambridge University Press:  15 March 2011

P. A. Salvador ,
B. Mercey ,
O. Perez ,
A. M. Haghiri-Gosnet ,
T.-D. Doan  and
B. Raveau
P. A. Salvador
Affiliation:
Carnegie Mellon University, Department of Materials Science and Engineering, Pittsburgh, PA, 15213-3890
B. Mercey
Affiliation:
Laboratoire CRISMAT-ISMRA, CNRS UMR 6508, 6 Bd. du Maréchal Juin, 14050 Caen cedex, FRANCE
O. Perez
Affiliation:
Laboratoire CRISMAT-ISMRA, CNRS UMR 6508, 6 Bd. du Maréchal Juin, 14050 Caen cedex, FRANCE
A. M. Haghiri-Gosnet
Affiliation:
Laboratoire CRISMAT-ISMRA, CNRS UMR 6508, 6 Bd. du Maréchal Juin, 14050 Caen cedex, FRANCE
T.-D. Doan
Affiliation:
Laboratoire CRISMAT-ISMRA, CNRS UMR 6508, 6 Bd. du Maréchal Juin, 14050 Caen cedex, FRANCE
B. Raveau
Affiliation:
Laboratoire CRISMAT-ISMRA, CNRS UMR 6508, 6 Bd. du Maréchal Juin, 14050 Caen cedex, FRANCE
Get access

Abstract

Thin films of Sr2TiO4 were grown using pulsed laser deposition (PLD) and laser-MBE on [100]-SrTiO3single crystal substrates. Films grown by standard PLD display only a single peak in the X-ray diffraction spectra, corresponding to the (006) peak of the K2NiF4 parent structure. Using a Laser-MBE, controlled two-dimensional growth and RHEED intensity oscillations can be routinely obtained. The period of the RHEED intensity oscillations was confirmed to correspond to the deposition of one-half the unit cell. In contrast to PLD-grown films, the (004) and (006) peaks are observed in XRD spectra for the Laser-MBE-grown films. The intensity of the (004) peak is discussed and modeled with respect to in-plane disorder arising from substrate step-edges and out-of-plane film-substrate structural mismatches. That a single, half unit-cell can be deposited allows one to "flip" the terminating surface of SrTiO3 in a controlled and simple manner from a pure TiO2 layer to a SrO layer. Experimental evidence of the importance of such surface control is given for the SrCuO2 structural stability.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 587: Symposium O – Substrate Engineering - Paving the Way to Epitaxy , 1999 , O3.3
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Kawasaki, M., Takahashi, K., Maeda, T., Tsuchiya, R., Shinohara, M., Ishiyama, O., Yonezawa, T., Yoshimoto, M. and Koinuma, H., Science 266, p. 1540 (1994).Google Scholar
2. Kawasaki, M., Ohtomo, A., Tsuchiya, R., Nishino, J. and Koinuma, H., in Mat. Res. Soc. Symp. Proc., edited by Foster, C., Speck, J.S., Schlom, D., Eom, C.-B. and Hawley, M.E. (Materials Research Society, Warrendale, 1997), p. 303.Google Scholar
3. Mercey, B. and Hamet, J. F., Le vide les couches minces 53, p. 61 (1997).Google Scholar
4. Salvador, P. A., Doan, T.-D., Mercey, B. and Raveau, B., Chem. Mater. 10, p. 2592 (1998).Google Scholar
5. Ruddlesden, S. N. and Popper, P., Acta. Cryst. 10, p. 538 (1957).Google Scholar
6. Chern, M. Y., Gupta, A. and Hussey, B. W., Appl. Phys. Lett> 60, p. 3045 (1992).+60,+p.+3045+(1992).>Google Scholar
7. Proffen, T. and Neder, R. B., J. Appl. Cryst. 30, p. 171 (1997).Google Scholar
8. Teske, C. L. and Müler-Buschbaum, H., Z. Anorg. Allg. Chem. 379, p. 234 (1970).Google Scholar
9. Takano, M., Tekeda, Y., Okada, H., Miyamoto, M. and Kusaka, T., Physica C 159, p. 375 (1989).Google Scholar