Hostname: page-component-586b7cd67f-t8hqh Total loading time: 0 Render date: 2024-11-29T07:43:25.475Z Has data issue: false hasContentIssue false
  • English
  • Français

Grain Structure Interaction Between Cold and Hot Sputtered Aluminum Films

Published online by Cambridge University Press:  15 February 2011

David L. O'Meara
David L. O'Meara*
Affiliation:
Hughes Aircraft Company, Technology Center, 6155 El Camino Real, Carlsbad, CA 92009
Get access

Abstract

The factors affecting the second layer grain structure of a two-aluminum-layer sputtered film were investigated with the use of a computer-aided experimental design and analysis program. A cold aluminum layer followed by a hotter aluminum layer has been described in the literature as a means of improving metal step coverage. Several factors were screened to determine the most important parameters by which the first layer influences the second. The two-layer interactions were determined by using scanning electron microscope (SEM) analysis to measure final grain structures. A model was generated from the experimental results that shows the influence of the first layer grain size on the second layer if the second sputter deposition is made above ∼300°C. The influence increases at higher temperatures. The results will be compared to grain growth models found in the literature.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 229: Symposium Q – Structure/Property Relationships for Metal/Metal Interfaces , 1991 , 281
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Movchan, B.A. and Demchishin, A.V., “Study of the Structure and Properties of Thick Vacuum Condensates of Nickel, Titanium, Tungsten, Aluminum Oxide and Zirconium Dioxide”, Fiz. Met. Metalloved. 28, (1969), p. 653.Google Scholar
2. Thorton, J.A., “Influence of Apparatus Geometry and Deposition Conditions on the Structure and Topography of Thick Sputtered Coatings”, J. Vac. Sci. Technol. 11 (4), July/Aug. (1974), p. 666.CrossRefGoogle Scholar
3. Srolovitz, D.J., Mazor, A. and Bukiet, B.G., “Analytical and Numerical Modeling of Columnar Evolution in Thin Films”, J. Va. Sci. Technol. A, 6, (4), July/Aug. (1988), p. 2371.CrossRefGoogle Scholar
4. Messier, R., Giri, A.P., and Roy, R.A., “Revised Structure Zone Model for Thin Film Physical Structure”, J. Vac. Sci. Technol. A, 2 (2), Apr/June (1984), p. 500.CrossRefGoogle Scholar
5. Levenson, L.L., “Grain Boundary Diffusion Activation Energy Derived from Surface Roughness Measurements of Aluminum Thin Films”, Appl. Phys. Left. 55 (25), Dec. (1989), p. 2617.CrossRefGoogle Scholar
6. Duffin, R.L., Freeman, J.L., Polito, A., Tracy, C.J., “Reliable Filling of Multilevel Interconnect Vias Using a Multi-step Aluminum Alloy Sputter Deposition”, ECS Spring Extended Abstracts, Vol.90–1, May 1990, p. 235.Google Scholar
7. Pramanik, D., Saxena, A.N., “Aluminum Metallization for ULSI”, Solid State Technology, March 1990, p. 73.Google Scholar
8. Varian 3180 Operations and Process Training Notebook.Google Scholar
9. “Application Note”, Solid State Technology, September (1990), p. 51.Google Scholar