Hostname: page-component-586b7cd67f-2brh9 Total loading time: 0 Render date: 2024-11-29T09:05:55.079Z Has data issue: false hasContentIssue false

Gettering and Gettering Stability of Metals at Oxide Particles in Silicon

Published online by Cambridge University Press:  03 September 2012

R. Falster
Affiliation:
MEMC, SpA, Viale Gherzi 31, 28100 Novara, Italy
Z. Laczik
Affiliation:
Department of Materials, Oxford University, Parks Road, Oxford OX1 3PH, UK
G. R. Booker
Affiliation:
Department of Materials, Oxford University, Parks Road, Oxford OX1 3PH, UK
A. R. Bhatti
Affiliation:
Department of Materials, Oxford University, Parks Road, Oxford OX1 3PH, UK
P. Török
Affiliation:
Department of Materials, Oxford University, Parks Road, Oxford OX1 3PH, UK
Get access

Abstract

Several aspects of metal gettering at internal oxide particle sites in Cz Si have been studied by ‘haze tests’, scanning infra-red microscopy (SIRM) and transmission electron microscopy (TEM). Haze tests indicated that complete gettering of Cu, Ni, Co and Pd can occur even when the amount of oxygen precipitated is below the detectable limit. TEM showed that the gettering of Cu, Pd and Ni proceeds by one of three different self-perpetuating mechanisms involving oxide particles and associated dislocations, the particular mechanism depending on the oxide particle size and the metal type. Haze tests and SIRM showed that for Cu and Ni there were minimum oxide particle number densities for effective gettering, and also maximum oxide particle number densities above which the additional oxide particles played no role in the gettering. These number densities depended on the metal type and specimen cooling rate. For all of these gettering behaviours, mechanisms are suggested to explain the results. The SIRM was also used to investigate for Cu and Ni the thermal stability of the gettering sites and the precipitated metals. The results showed that during repeated heat treatments the gettering occurs by a dynamic process.

Type
Research Article
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Falster, Robert and Bergholz, Werner, J. Electrochem. Soc., 137, 1578 (1990).Google Scholar
2. Graff, K., in “Aggregation Phenomena of Point Defects in Silicon”, PV-83–4, Sirtl, E., Goorissen, J. and Wagner, P., Editors, pp. 121133, The Electrochemical Society Softbound Proceedings Series, Pennington, NJ (1983).Google Scholar
3. Graff, K., Hefner, H. A. and Hennerici, W., J. Electrochem. Soc., 135, 952 (1988).CrossRefGoogle Scholar
4. Bhatti, A. R., Falster, R. and Booker, G. R., Solid State Phenomena, 19 & 20, 51 (1991).Google Scholar
5. Falster, R. J., Fisher, G. R. and Ferrero, G., Appl. Phys. Lett., 59, 809 (1991).CrossRefGoogle Scholar
6. Laczik, Z., Falster, R. and Booker, G. R., Solid State Phenomena, 19 & 20, 39 (1991).Google Scholar
7. Falster, R., Laczik, Z., Booker, G.R. and Török, P., Solid State Phenomena, 19 & 20, 33 (1991).Google Scholar
8. Shimura, F., Tsuya, H. and Kawamura, T, J. Appl. Phys., 51, 269 (1980).Google Scholar
9. Seibt, M. and Graff, K., J. Appl. Phys., 63, 4444 (1988).CrossRefGoogle Scholar
10. Ourmazd, A. and Schröter, W., Appl Phys. Lett., 45, 781 (1984).Google Scholar
11. Cerva, H. and Wendt, H., Micros, of Semicond. Mater. Oxford, 1989, Inst. Phys Confer. Ser. No. 100, p. 587.Google Scholar
12. Nes, E. and Washburn, J., J. Appl. Phys., 42, 3562 (1971).Google Scholar
13. Booker, G. R., Laczik, Z. and Kidd, P., Proc. of Conference ‘Defect Recognition and Imaging in Semiconductors Before and After Processing (DRIP4)’, Wilmslow, UK, 1991, Semiconductor Science and Technology, 7, A110 (1992).Google Scholar
14. Hara, A., Fukuda, T., Miyabo, T. and Hirai, I., J. Appl. Phys., 66, 3958 (1989).Google Scholar
15. Laczik, Z. and Bhatti, A. R. (unpublished work).Google Scholar