Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-25T17:36:45.114Z Has data issue: false hasContentIssue false
  • English
  • Français

Firing Ceramics with a Large 17.6kW Microwave Kiln

Published online by Cambridge University Press:  15 February 2011

M. J. Bratt ,
M. G. Hamlyn  and
A. L. Bowden
M. J. Bratt
Affiliation:
School of Engineering, Staffordshire University, Beaconside, Stafford ST18 OAD, United Kingdom.
M. G. Hamlyn
Affiliation:
School of Engineering, Staffordshire University, Beaconside, Stafford ST18 OAD, United Kingdom.
A. L. Bowden
Affiliation:
School of Engineering, Staffordshire University, Beaconside, Stafford ST18 OAD, United Kingdom.
Get access

Abstract

This paper gives details of microwave firing experiments carried out with a large 17.6kW 2450 MHz microwave kiln on a range of ceramic materials.

The design of the large kiln is discussed, together with results of large batches of ceramic products. The design of successful heating experiments in terms of thermal insulation and microwave susceptors is discussed in relationship to the dielectric properties of the material to be fired.

Results are given of the fired properties from batches of products fired in the kiln, and the uniformity of the fired properties of large batches is discussed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 347: Symposium O – Microwave Processing of Materials IV , 1994 , 459
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Katz, K. D. “Microwave Processing of Ceramics.” Industry-University Advanced Materials Conference, Denver 6/3/1989.Google Scholar
2. Hamlyn, M.G., Bowden, A.L. Microwave Processing of Earthenware Ceramics Am Ceram Soc Bull 69 (3) 368–372, 1990 Google Scholar
3. Hutcheon, R., de Jong, M., Adams, F. “A System for Rapid Measurements of RF and Microwave Properties up to 1400°C.” J. Microwave Power and Electromagnetic Energy Vol. 27 (2), pp 87–92, 1992.Google Scholar
4. Evans, N.G., Hamlyn, M.G. “Density Dependence of High Temperature Dielectric Properties of debased Alumina and the Effect of a High Loss Additive” MRS Spring Meeting 1994, San Francisco Google Scholar
5. Hamlyn, M. G., “Microwave Sintering of Ceramics.” PhD thesis, Staffordshire Polytechnic 1991.Google Scholar
6. De, A.S., Ahmad, I., Whitney, E.D., Clarke, D.E. “Microwave (hybrid) Heating of Alumina at 2.45GHz: I, Microstructural Uniformity and Homogeneity” Ceramic Transactions (21), 319–328, 1991 Google Scholar