Hostname: page-component-cd9895bd7-p9bg8 Total loading time: 0 Render date: 2024-12-25T04:50:36.995Z Has data issue: false hasContentIssue false
  • English
  • Français

Finite Element Formulation of a Piezoelectric Continuum and Performance Studies of Laminar PZT-Patch-Modules

Published online by Cambridge University Press:  01 February 2011

Monika Gall ,
Bärbel Thielicke ,
Christophe Poizat  and
Sven Klinkel
Monika Gall
Affiliation:
Fraunhofer Institute for Mechanics of Materials IWM, Woehlerstrasse 11, 79108 Freiburg, Germany, Contact: [email protected]
Bärbel Thielicke
Affiliation:
Fraunhofer Institute for Mechanics of Materials IWM, Woehlerstrasse 11, 79108 Freiburg, Germany, Contact: [email protected]
Christophe Poizat
Affiliation:
Fraunhofer Institute for Mechanics of Materials IWM, Woehlerstrasse 11, 79108 Freiburg, Germany, Contact: [email protected]
Sven Klinkel
Affiliation:
Institute for Structural Analysis, University of Karlsruhe (TH), Kaiserstrasse 12, 76131 Karlsruhe, Germany
Get access

Abstract

Efficient application of piezoelectric sensors and actuators requires extensive investigations of their loading limits, failure-behavior and life-span under service conditions. Here the performance of laminar PZT-patch-modules is studied, applying a combined approach of experimental and numerical tests. Four-point bending tests are used to evaluate the sensor performance. Linear electro-mechanical coupling is implemented in an 8-node brick user element of the research finite element code FEAP to develop a flexible FE-tool for piezoelectric problems. Comparative FE-analyses of the bending test are carried out in order to assess the capability of the implemented FEAP user element versus the commercially available FE-code ABAQUS. FE-results show good agreement with the experimental tests, different element types yield slight deviations which are discussed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 881: Symposium CC – Coupled Nonlinear Phenomena Modeling and Simulation for Smart, Ferroic and Multiferroic Materials , 2005 , CC3.3
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Wierach, P., Monner, H.P., Schönecker, A. and Dürr, J.K., Proc. SPIE Int. Soc. Opt. Eng. 4698, 333 (2002).Google Scholar
2 Thielicke, B., Gesang, T. and Wierach, P., Smart Mater. Struct. 12, 993–996 (2003).Google Scholar
3 Taylor, R.L., “FEAP A Finite Element Analysis Program”, http://www.ce.berkeley.edu/~rlt/feap/ Google Scholar
4 Landis, C.M., J. Mech. Phys. Solids 50, 127–152 (2002).Google Scholar
5 Klinkel, S. and Wagner, W., “A Nonlinear Piezoelectric Mixed Solid Shell Finite Element Formulation”, 3rd M.I.T. Conf. on Computational Fluid and Solid Mech. (2005), accepted.Google Scholar
6 and, C. Poizat Benjeddou, A., “On analytical and numerical modelling of piezoelectric bimorphs”, Proc. of the CST04 Int. Conf. on Computational Struct. Techn., edited by Topping, B.H.V. and Soares, C.A. Mota, Civil-Comp Press, paper 7, 1–20 (2004).Google Scholar
7 and, A. Fernandes Pouget, J., Int. J. Solids Struct. 40, 4331–4352 (2003).Google Scholar