Hostname: page-component-78c5997874-g7gxr Total loading time: 0 Render date: 2024-11-19T23:59:40.215Z Has data issue: false hasContentIssue false

Field Emission Properties of Carbon Nanotubes Synthesized by High Temperature Arc Method and Low Temperature CVD Method

Published online by Cambridge University Press:  15 February 2011

Hong-Jen Lai
Affiliation:
Materials Research Laboratories, Industrial Technology Research Institute Chutung, Hsinchu, Taiwan, 31040, R. O. C.
Sheng-Chin Kung
Affiliation:
Materials Research Laboratories, Industrial Technology Research Institute Chutung, Hsinchu, Taiwan, 31040, R. O. C.
Chih-Ming Hsu
Affiliation:
Materials Research Laboratories, Industrial Technology Research Institute Chutung, Hsinchu, Taiwan, 31040, R. O. C.
Bean-Jon Li
Affiliation:
Materials Research Laboratories, Industrial Technology Research Institute Chutung, Hsinchu, Taiwan, 31040, R. O. C.
Ching-Cheng Lin
Affiliation:
Materials Research Laboratories, Industrial Technology Research Institute Chutung, Hsinchu, Taiwan, 31040, R. O. C.
Chih. Jen. Lin
Affiliation:
Materials Research Laboratories, Industrial Technology Research Institute Chutung, Hsinchu, Taiwan, 31040, R. O. C.
Get access

Abstract

The microstructure and field emission properties of multi walled carbon nanotubes (MWNTs) were investigated. The comparisons are made between MWNTs synthesized by high temperature arc methods and low temperature CVD methods. The results of the HRTEM image clearly exhibit characteristic features of a multi walled carbon nanotube. Raman spectrum shows a stronger peak at about 1580 cm-1 indicating the formation of a well-graphitized carbon nanotube. It also shows the high temperature arc process can produce MWNT that has perfect graphitic layer structure and high I(G)/I(D) ratio. The Ratio of G-line (sp2 bond) and D-line(sp3 bond) of these MWNTs are about 2.8 to 5.2. From the field emission measurement, the low onset field is about 1.4 to 2.4 V/ m, and can be attributed to highly sharp tips and high electric conductivity of MWNTs.

Type
Research Article
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Iijima, S., Nature, 354 (1991) 56.Google Scholar
2. Heer, W.A. de, Chatelain, A., and Ugarte, D., Science, 270 (1995) 1179.Google Scholar
3. Wang, Q. H. et al., Appl. Phys. Lett., 70 (1997) 3308.Google Scholar
4. Saito, Y., Uemura, S., Carbon, 38 (2000) 169.Google Scholar
5. Uemura, S., et al., SID'00 Digest (2000) 320.Google Scholar
6. Choi, W. B. et al., SID'00 Digest (2000) 324.Google Scholar
7. Bonard, J. M. et al., Appl. Phys. Lett., 73 (1998) 918.Google Scholar
8. Kim, J. M., Choi, W. B., Lee, N. S., and Jung, J. E., Diamond and Related Materials, 9 (2000) 1184 Google Scholar
9. Lin, C. C., Lai, H. J., Lai, M. S., Yang, M. H., and Li, A. K., Mater. Phys. Mech., 4 (2001) 138.Google Scholar
10. Kim, K.S. et al., Carbon Science, Vol.1, No.2 (2000) 53.Google Scholar
11. Cao, A., Zhang, X., Xu, C., Liang, J., Wu, D., Chen, X., Wei, B., Ajayan, P. M., Appl. Phys. Lett., 79 (2001) 1252.Google Scholar
12. Allaoui, A., Bai, S., Cheng, H. M., Bai, J. B., Composites Science and Technology, 62 (2002) 1993.Google Scholar