Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-29T07:32:03.280Z Has data issue: false hasContentIssue false
  • English
  • Français

Ferroelectric Composite of Ba1−xSrxTiO3 With Al2O3 and MgO Synthesized by Sol-Gel Method

Published online by Cambridge University Press:  10 February 2011

Pramod K. Sharma ,
K. A. Jose ,
V. V. Varadan  and
V. K. Varadan
Pramod K. Sharma
Affiliation:
Center for the Engineering of Electronics and Acoustic Materials, Department of Engineering Science and Mechanics, The Pennsylvania State University, University Park, PA 16802, USA
K. A. Jose
Affiliation:
Center for the Engineering of Electronics and Acoustic Materials, Department of Engineering Science and Mechanics, The Pennsylvania State University, University Park, PA 16802, USA
V. V. Varadan
Affiliation:
Center for the Engineering of Electronics and Acoustic Materials, Department of Engineering Science and Mechanics, The Pennsylvania State University, University Park, PA 16802, USA
V. K. Varadan
Affiliation:
Center for the Engineering of Electronics and Acoustic Materials, Department of Engineering Science and Mechanics, The Pennsylvania State University, University Park, PA 16802, USA
Get access

Abstract

Barium strontium titanate with low dielectric constant, low loss tangent and high tunability, has unique application as phase shifter in radar and antenna. This work presents an alternative fabrication of the composite of barium strontium titanate with metal oxides such as Al2O3 and MgO. Ba1−xSrxTiO3 (BST), xergels of various compositions (x = 0.2, 0.4, 0.5 and 0.6) were prepared by sol-gel method. Xerogels were calcined at 800 °C. The structure of the final powders was investigated by x-ray diffraction (XRD). The resultant BST was then mixed with metal oxides in the desired weight percentage and ball milled in an organic solvent (ethyl alcohol) with a binder (acrylic polymer). The final samples were sintered at 1250 °C in air. The dielectric properties of the composites were determined by using impedance analyzer at the frequency of 1MHz. This work has reported the effect of Al2O3 and MgO, on the electronic behavior of the final BST-metal oxide composites.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 606: Symposium NN – Chemical Processing of Dielectrics, Insulators & Electronic Ceramics , 1999 , 175
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Babbutt, R. W., Koscica, T. E. and Drach, W. C., Microwave Journal, (1992), 6,63.Google Scholar
2 Varada, V. K., Jose, K. A., Varadan, V. V., Hughes, R., Kelly, J. F., Microwave Journal, (1995), 4, 244.Google Scholar
3 Rao, J. B. L., Patel, D. P. and Krichevsky, V., IEEE transaction on Antenna and Propagation, (1999),47,458.Google Scholar
4 Varadan, V. K., Ghodgaonkar, D. K., Varadan, V. V., Kelly, J. F. and Glikerdas, P., Microwave Journal, (1992), 1,116.Google Scholar
5 Park, R. H., Microwave Journal, (1981), 9, 101.Google Scholar
6 Brinker, C. J. and Scherer, G. W., Sol-gel science: The physics and chemistry of sol gel processing; Academic Press, Boston (1990).Google Scholar
7 Mehrotra, R. C.. Structure and Bonding, (1992), 77, 153.Google Scholar
8 Sakka, S. and Kamiya, K., J. Non-Cryst. Solids, (1982), 48, 31.Google Scholar
9 Sharma, Pramod K., Jose, K. A., Varadan, V. V. and Varadan, V. K., Mater. Res.Soc. Symp. (1999) 606.Google Scholar
10 Herner, S. B., Selmi, F. A., Varadan, V. V. and Varadan, V. K., Mater. Lett. (1993), 15,317.Google Scholar
11 Chan, N. H., Sharma, R. K. and Smyth, D. M., J. Am. Cer. Soc. (1982), 65, 165.Google Scholar
12 Sengupta, L., Ngo, E., Stowell, S., O'Day, M., Lancio, R., U.S. Patent, (1996) 5486491.Google Scholar
13 Sengupta, L., Ngo, E., Stowell, S., O'Day, M., Lancio, R., U.S. Patent, (1996) 5312790.Google Scholar