Hostname: page-component-586b7cd67f-rdxmf Total loading time: 0 Render date: 2024-11-27T03:51:49.940Z Has data issue: false hasContentIssue false
  • English
  • Français

Failure Mechanism Researches of Material Surface and Interface in Micro-Scratch Test

Published online by Cambridge University Press:  11 February 2011

Yueguang Wei ,
Manhong Zhao  and
Shan Tang
Yueguang Wei
Affiliation:
LNM, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100080, P.R. China
Manhong Zhao
Affiliation:
LNM, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100080, P.R. China
Shan Tang
Affiliation:
LNM, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100080, P.R. China
Get access

Abstract

In the present research, the adhesion properties and failure mechanisms for a ductile thin film on a silicon substrate (Ni/Si) are studied experimentally, and are simulated theoretically. In the experimental research, the relations of the horizontal driving force, vertical displacement and the frictional coefficients with horizontal displacement are measured. Furthermore, the variation of the total energy release rate and the frictional coefficient between contact surfaces are measured through obtaining a frictional effect law. The law displays that the frictional influences on the energy release rate of the total system weakly depend on the thin film thickness. This conclusion leads to that the frictional effect can be eliminated in the toughness ratio relation approximately. So that one can directly obtain the interfacial adhesion toughness from measurements in the micro-scratching test. In addition, the micro-scratching process for the ductile thin film/brittle substrate systems is simulated using the double cohesive zone model. Prediction results of the energy release rate are obtained, and are compared with the experimental results obtained in the present research.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 750: Symposium Y – Surface Engineering 2002–Synthesis, Characterization and Applications , 2002 , Y8.6
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Blees, MH, Winkelman, GB, Balkenende, AR, et al. The effect of friction on scratch adhesion testing: application to a sol-gel coating on polypropylene, Thin Solid Films, 359, 1 (2000).Google Scholar
2. Pistor, C., Friedrich, K. Scratch and indentation tests on polyoxymethylene (POM), J. Appl. Polymer Science, 66, 1985 (1997).Google Scholar
3. Bull, SJ. Failure modes in scratch adhesion testing, Surface & Coatings Tech., 50, 25 (1991).Google Scholar
4. Maekawa, H, Ikeda, T, Horibe, H, et al. On the scratch pattern of evaporated thin metal film, Quart. J. Japan Welding Society, 12, 262 (1994).Google Scholar
5. Dutta, I, Campbell, JC. Determination of the adhesive strength of film-substrate interface using the constant depth scratch test, Mater. Res. Soc. Symp. Proc., 390, 49 (1995).Google Scholar
6. Venkataraman, S, Kohlstedt, DL, Gerberich, WW. Continuous microscratch measurements of the practical and true works of adhesion for metal/ceramic systems, J. Mater. Res., 11, 3133 (1996).Google Scholar
7. Jardret, V, Zahouani, H, Loubet, JL, et al. Understanding and quantification of elastic and Plastic deformation during a scratch test, Wear, 218, 8 (1998).Google Scholar
8. Wei, Y, Hutchinson, JW. Interface strength, work of adhesion and plasticity in the peel test, Int. J. Fracture, 93, 315 (1998).Google Scholar
9. Wei, Y, Zhao, M, Tang, S. Characterization of the fracture work for ductile film undergoing the micro-scratch, Acta Mechanica Sinaca, 18, 494 (2002).Google Scholar
10. Zhao, M. Experimental and theoretical researches of failure mechanism of material surface and interface in micro-scratch test, Master thesis of the Institute of Mechanics, Chinese Academy of Sciences, July, 2002.Google Scholar