Hostname: page-component-78c5997874-fbnjt Total loading time: 0 Render date: 2024-11-20T00:55:53.975Z Has data issue: false hasContentIssue false
  • English
  • Français

Fabrication of Zirconia Coatings using Electrophoretic Deposition and Reactive Sintering

Published online by Cambridge University Press:  11 February 2011

Ying Yuan ,
Xin Wang  and
Ping Xiao
Ying Yuan
Affiliation:
Manchester Materials Science Centre, University of Manchester, Grosvenor Street, Manchester, M1 7HS, U.K.
Xin Wang
Affiliation:
Manchester Materials Science Centre, University of Manchester, Grosvenor Street, Manchester, M1 7HS, U.K.
Ping Xiao*
Affiliation:
Manchester Materials Science Centre, University of Manchester, Grosvenor Street, Manchester, M1 7HS, U.K.
*
* Fax: +44 161 200 3586. Email address: [email protected]
Get access

Abstract

Electrophoretic deposition (EPD) technique has been used to fabricate green YSZ/Al composite coatings with controlled thickness and morphology. Such green coating was transformed into the YSZ/Al2O3 composite coating during following thermal treatment in air at temperatures up to 1200°C. Suspension for EPD was prepared by attrition-milling a mixture of yttria -stabilised zirconia (YSZ) and aluminium (Al) in acetyl-acetone (ACAC). The attrition milling reduced the particle size of the powder mixture. A mechanical alloying behaviour is believed to control the agglomeration and the breaking of large Al particles. Attrition milling also reduced the YSZ crystallite size, which can be attributed to the chemical reaction between YSZ/Al particles and ACAC. Thermal analyses and dilatometry measurements of the green compact indicate the temperature range for oxidation of Al and its effect on sintering of the coating. The coating obtained from EPD in the suspension after a longer milling time was found to have more uniform in microstructure.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 750: Symposium Y – Surface Engineering 2002–Synthesis, Characterization and Applications , 2002 , Y5.24
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Sarkar, P. and Nicholson, P. S., “Electrophoretic Deposition (EPD): Mechanisms, Kinetics and Applications to Ceramics,” J. Am. Ceram. Soc., 79 [8] 1987–2002 (1996)Google Scholar
2. Ferrari, B. and Moreno, R., “Electrophoretic Deposition of Aqueous Alumina Slips,” J. Eur. Ceram. Soc., 17 549–56 (1997)Google Scholar
3. Wang, Z., Shemilt, J. and Xiao, P., “Fabrication of Ceramic Composite Coatings using Electrophoretic Deposition, Reactio n Bonding and Low Temperature Sintering,” J. Eur. Ceram. Soc., 22 (2002) 183–189 Google Scholar
4. Wang, Z., Xiao, P. and Shemilt, J., “Fabrication of Composite Coatings using a Combination of Electrochemical Methods and Reaction Bonding Process,” J. Eur. Ceram. Soc., 20 (2000) 1469–1473 Google Scholar
5. Wang, Z., Shemilt, J. and Xiao, P., “Novel Fabrication Technique for the Production of Ceramic/Ceramic and Metal/Ceramic Composite Coatings,” Scripta Mater. 42 (2000) 653–659 Google Scholar
6. Claussen, N., Le, T., and Wu, S., “Low Shrinkage Reaction Bonded Alumina,” J. Eur. Ceram. Soc., 5, 29–35 (1989)Google Scholar
7. Herbst, J. and Sepulveda, J. “Fundamentals of Fine and Ultrafine Grinding in a Stirred Ball Mill”; pp. 1–28 in Proceedings of International Powder Technology and Bulk solids Handling Conference, Chicago, IL, 1978 Google Scholar
8. Claussen, N., Wu, S. and Holz, D., “Reaction Bonding of Aluminum Oxide (RBAO) Composites: Processing, Reaction Mechanisms and Properties,” J. Eur. Ceram. 14 (1994) 97–109 Google Scholar