Hostname: page-component-78c5997874-lj6df Total loading time: 0 Render date: 2024-11-03T05:32:53.560Z Has data issue: false hasContentIssue false

Fabrication of Glass Micro- and Nanospheres from Liquid Precursors Using Droplet Generation and Sol-Gel Processing

Published online by Cambridge University Press:  15 February 2011

Kyekyoon Kim*
Affiliation:
University of Illinois, Departments of Electrical and Computer Engineering and Materials Science and Engineering 1406 West Green Street, Urbana, Illinois 61801, USA
Get access

Abstract

Two novel methods particularly suitable for continuously fabricating uniform glass spheres are described, one suitable for spheres micrometers to millimeters in diameter and the other for spheres of diameters in the submicron range, down to tens of nanometers. Both methods start from liquid precursors and combine droplet generation which is effected by a nozzle with sol-gel processing. One difference is that in the latter method, which is termed the charged liquid cluster beam (CLCB) technique, one employs flow-limited field-injection electrostatic spraying to further reduce the size of the drops to the nanometer range in the droplet generation process. Using the two methods, uniform hollow silica aerogel spheres, micrometer to millimeter in diameter, of controlled porosity and silica spheres with diameters in the nanometer range were produced. By utilizing the appropriate liquid precursors, the present methods can fabricate spheres composed of a variety of materials, including glass. Due to its ability to fabricate nanodrops, the CLCB technique is suited to fabricating nanoparticles as well as thin films of controlled stoichiometry and chemical composition.

Type
Research Article
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Foster, C. A., Kim, K., Turnbull, R. J., and Hendricks, C. D., Rev. Sci. Instrum. 48, 625 (1977); and the references therein.Google Scholar
2. Calliger, R. J., Turnbull, R. J., and Hendricks, C. D., Rev. Sci. Instrum. 48, 846 (1977); and the references therein.Google Scholar
3. Kim, K. and Turnbull, R. J., J. Appl. Phys. 47, 1964 (1976).Google Scholar
4. Kim, N. K., Kim, K., Payne, D. A., and Upadhye, R. S., J. Vac. Sci. Technol. A 7, 1181 (1989).Google Scholar
5. Jang, K. Y., Kim, K., and Upadhye, R. S., J. Vac. Sci. Technol. A 8, 1732 (1990).Google Scholar
6. Kim, K., Jang, K. Y., and Upadhye, R. S., J. Am. Ceram. Soc. 74, 1987 (1991).Google Scholar
7. Jang, K. Y. and Kim, K., J. Vac. Sci. Technol. A10, 1152 (1992).Google Scholar
8. Kim, K. and Ryu, C. K., NanoStructured Materials 4, 597 (1994).Google Scholar
9. Halpern, R. and Gomer, R., J. Chem. Phys. 51, 1031 (1969).Google Scholar
10. Halpern, R. and Gomer, R., J. Chem. Phys. 51, 1048 (1969).Google Scholar
11. Ryu, C. K. and Kim, K., manuscript in preparation.Google Scholar
12. Kim, K. and Ryu, C. K., United States Patent No. 5 344 676 (6 September 1994).Google Scholar