Hostname: page-component-586b7cd67f-2plfb Total loading time: 0 Render date: 2024-11-29T09:03:15.455Z Has data issue: false hasContentIssue false
  • English
  • Français

Experimental Study of Loss Mechanisms in Polymer-Metal Composites at Microwave Frequencies

Published online by Cambridge University Press:  15 February 2011

John P. Ludman  and
Curtis H. Stern
John P. Ludman
Affiliation:
Virginia Polytechnic Institute and State University, Department of Mechanical Engineering, Blacksburg, VA 24061–0238
Curtis H. Stern
Affiliation:
Virginia Polytechnic Institute and State University, Department of Mechanical Engineering, Blacksburg, VA 24061–0238
Get access

Abstract

The microwave heatability of a low loss polymer (polypropylene) was enhanced by the addition of a conductive powder (iron). The effects of the amount (5–40% iron by volume) and size of the conductive particles on the microwave heatability were studied. The complex permittivity and complex permeability at microwave frequencies and the dc resistivity were measured. Samples were also heated in a multimode microwave cavity. Results show that microwave heating increased with increasing iron concentration. However, the penetration depth of the microwaves decreased with increasing iron content, and dramatically decreased when the polypropylene-iron composites became electrically conductive at the percolation threshold.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 347: Symposium O – Microwave Processing of Materials IV , 1994 , 717
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Aharoni, S., J. of Applied Physics 43 (5): 2463–2465 (1972).Google Scholar
2. Bueche, F., J. of Applied Physics 43 (11): 4837–4838 (1972).Google Scholar
3. Mallaris, A. and Turner, D., J. of Applied Physics 42 (2): 614–618 (1971).Google Scholar
4. Clarricoats, P.J., Microwave Ferrites. (Chapman and Hall, London, 1961).Google Scholar
5. Bouazzi, A., and Gourdenne, A., European Polymer Journal 24 (9): 889–893 (1988).Google Scholar
6. Raj, R.G., Polymeric Materials; Science and Engineering 55, 49–51 (1986).Google Scholar
7. Raj, R.G., Polymeric Materials; Science and Engineering 57, 537–539 (1987).Google Scholar
8. ASTM Standard D257, Standard Test Method for DC Resistance of Insulating Materials 10.01, 111–126 (1991).Google Scholar
9. Nicolson, A. and Ross, G., IEEE Transactions on Instrumentation and Measurements, 191 (4): 377–382 (1970).Google Scholar