Hostname: page-component-586b7cd67f-rcrh6 Total loading time: 0 Render date: 2024-11-23T04:53:48.755Z Has data issue: false hasContentIssue false
  • English
  • Français

Experimental Investigations of the Sneddon Solution and an Improved Solution for the Analysis of Nanoindentation Data

Published online by Cambridge University Press:  10 February 2011

Jack C. Hay  and
G. M. Pharr
Jack C. Hay
Affiliation:
I.B.M. Research, T.J. Watson Research Center, P.O. Box 218, Yorktown Heights, NY, 10598-0218
G. M. Pharr
Affiliation:
Department of Materials Science, Rice University, 6100 Main Street; M.S. 321, Houston, TX 77005-1892
Get access

Abstract

The Sneddon solution, as it is implemented in the Oliver-Pharr method, deviates from the indentation experimental data in a manner which depends on both the indenter angle and the Poisson ratio of the sample. These effects are demonstrated experimentally by performing indentations in tungsten and aluminum using a cube-cube comer indenter where the effects are exacerbated by the small indenter angle. The first objective was to experimentally support and validate an approximate analytical solution in conjunction with finite element simulations which illustrate the Poisson ratio and indenter angle effects. Second, a review of data analysis procedures is presented which leads to a better understanding of the systematic errors which percolate through in the measurement of Young's modulus and hardness.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 522: Symposium T – Fundamentals of Nanoindentation & Nanotribology , 1998 , 39
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Hay, J.C., Bolshakov, A., Pharr, G.M., submitted to Mat. Res. Soc. Symp. Proc. ‘T’, Spring 1998.Google Scholar
2. Bolshakov, A., Pharr, G.M., Mat. Res. Soc. Symp. Proc., 436, 189–194 (1997).Google Scholar
3. Bolshakov, A., Oliver, W.C., Pharr, G.M., J. Mater. Res., 11, 760–768 (1996).Google Scholar
4. Sneddon, I.N., Int. J. Engng. Sci., 3, 47–57 (1965).Google Scholar
5. Sneddon, I.N., Fourier Transforms. McGraw-Hill Book Company, Inc., 1951, pp. 450–467.Google Scholar
6. Oliver, W.C., Pharr, G.M., J. Mater. Res., 7, 1564–1583 (1992).Google Scholar
7. Pharr, G.M., Oliver, W.C., Brotzen, F.R., J. Mater. Res., 7, 613–617 (1992).Google Scholar
8. Hertzberg, R.W., Deformation and Fracture Mechanics of Engineering Materials, (John Wiley & Sons, New York, 1989) p. 7.Google Scholar
9. Doerner, M.F., Nix, W.D., J. Mater. Res., 1, 601 (1986).Google Scholar