Hostname: page-component-586b7cd67f-vdxz6 Total loading time: 0 Render date: 2024-11-29T07:42:32.191Z Has data issue: false hasContentIssue false
  • English
  • Français

Excimer Laser Deposition of HighlY Oriented PLZT Thin Films

Published online by Cambridge University Press:  16 February 2011

G.A. Petersen ,
L.C. Zou ,
W.M. Van Buren ,
L.L. Boyer  and
J.R. Mcneil
G.A. Petersen
Affiliation:
University of New Mexico, Center for High Technology Materials, EECE Building, Albuquerque, NM. 87131
L.C. Zou
Affiliation:
University of New Mexico, Center for High Technology Materials, EECE Building, Albuquerque, NM. 87131
W.M. Van Buren
Affiliation:
University of New Mexico, Center for High Technology Materials, EECE Building, Albuquerque, NM. 87131
L.L. Boyer
Affiliation:
University of New Mexico, Center for High Technology Materials, EECE Building, Albuquerque, NM. 87131
J.R. Mcneil
Affiliation:
University of New Mexico, Center for High Technology Materials, EECE Building, Albuquerque, NM. 87131
Get access

Abstract

Laser ablation provides a suitable technique of ferroelectric thin film deposition. We have used this technique to produce films of Pb1−xLax(Zr1−y Tiy)1−x/4O3 (PLZT), a class of ceramic materials which has a wide range of composition dependent electro-optical properties. PLZT films of (7/0/100) and (28/0/100) composition have been deposited onto both crystalline Si <100> and amorphous fused silica substrates. Laser ablation provides high deposition rates and good crystal structure of thin ferroelectric films on silicon. The methods required to achieve proper stoichiometry in the films are also discussed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 200: Symposium Y – Ferroelectric Thin Films I , 1990 , 127
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Rose, T.L., Kellzner, E.M., Scovelle, A.N., and Stone, S.E., J. Appl. Phys. 55, 3706 (1984).Google Scholar
2. Dharmadmikovi, V.S. and Gramnemann, W.W., J. Appl. Phys. 53, 8988 (1982).Google Scholar
3. Salema, C.A.T. and Siciumca, E., J. Vac. Sci. Tech, 9 91 (1972).Google Scholar
4. Sreenivas, K. and Mansingh, A., presented at the 1986 IEEE-ISAF Conference, Bethlehem, PA, 1986.Google Scholar
5. Sankur, H. and Hall, R., Appl. Opt. 24. 3343 (1985).Google Scholar
6. Dikshit, S.J., Gadbole, V.P., Chaudhari, S.M., Kanetkur, S.M., and Ogale, S.B., Appl. Phys. Lett. 54, 775 (1989).Google Scholar
7. Sankur, H. and Cheung, J.T., J. Vac. Sci. Tech. A. 1, 1806 (1983).Google Scholar
8. Boyer, L.L., Wu, A.Y., Metzger, G.W., and McNeil, J.R., J. Vac. Sci. Tech. A. 7, 1199 (1989).Google Scholar
9. Mukherjee, A. and Brueck, S.R.J., to be published in Opt. Comm.Google Scholar