Hostname: page-component-669899f699-g7b4s Total loading time: 0 Render date: 2025-04-24T15:01:52.429Z Has data issue: false hasContentIssue false
  • English
  • Français

Evaluation of Prestressing with a Shape Memory Alloy

Published online by Cambridge University Press:  10 February 2011

Arup K. Maji
Arup K. Maji*
Affiliation:
Air Force Research Laboratory (VSDV), Albuquerque, NM 87117-5776.
Get access

Abstract

The paper addresses the possibility of using shape-memory effect in Nitinol (Nickel-Titanium) alloy to remedy prestress losses in aging concrete beams. Straight annealed NiTi in the low temperature martensite phase can undergo large plastic deformations. This deformation and strain energy is recoverable when the material transforms to the higher temperature (about 55° C) austentite phase. This phenomena can be exploited to induce curvature, hence prestressing, by embedding NiTi wires and ropes in a structural member. Depending on the type of wire used its actuation effect can be reversed as necessary, creating the possibility of a smart prestressed concrete bridge of the future.

Materials aspect studied in this project include the bond between NiTi wires and the host composite material, through mechanical testing and microscopy. An evaluation of the phase transformation is conducted using Acoustic Emission (AE) technology. AE event rate, locations and characteristics were evaluated during the actuation process.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 503: Symposium JJ – Nondestructive Characterization of Materials in Aging Systems , 1997 , 287
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1. Buehler, W. J., Gilfrich, J. V. and Wiley, R.C., “J. Applied Physics, V34, 1963, pp.1475.Google Scholar
2. Duerig, K. W. and Melton, K. N., “Designing with the Shape-Memory Effect”, MRS International Meeting on Advanced Materials, V9, 1989, pp. 581.Google Scholar
3. Maji, A. K. and Sahu, R., “Acoustic Emissions from Reinforced Concrete”, Experimental Mechanics J., V34, No. 4, December, 1994, pp. 379–388.Google Scholar
4. Maji, A. K., Satpathi, and Kratochvil, T., “Acoustic Emission Source Location Using Lamb Wave Modes”, J. of Engng. Mechanics, ASCE, Feb., 1997, pp. 154–161.Google Scholar
5. Shape Memory Applications, Inc., web-page, http://www.sma-inc.com, NiTi Smart Sheets, 1–9, 1997.Google Scholar
6. White, S. R., Whitlock, M. E., Ditman, J. B. and Hebda, D. A., “Manufacturing of Adaptive Graphite-Epoxy Structures with Embedded Nitinol Wires”, Adaptive Structures and Materials Systems – AD Vol 35, ASME, 1993, pp. 71.Google Scholar