Hostname: page-component-cd9895bd7-dk4vv Total loading time: 0 Render date: 2024-12-27T01:55:48.512Z Has data issue: false hasContentIssue false
  • English
  • Français

Electrospun Composite Nanofiber Transparent Conductor Layer for Solar Cells

Published online by Cambridge University Press:  20 June 2011

Justin Ritchie ,
Joël Mertens ,
Heejae Yang ,
Peyman Servati  and
Frank K. Ko
Justin Ritchie
Affiliation:
Dept. of Materials Engineering, University of British Columbia, 309-6350 Stores Road Vancouver, B.C. V6T 1Z4, Canada
Joël Mertens
Affiliation:
Dept. of Materials Engineering, University of British Columbia, 309-6350 Stores Road Vancouver, B.C. V6T 1Z4, Canada
Heejae Yang
Affiliation:
Dept. of Materials Engineering, University of British Columbia, 309-6350 Stores Road Vancouver, B.C. V6T 1Z4, Canada
Peyman Servati
Affiliation:
Dept. of Electrical Engineering, University of British Columbia, 5500 - 2332 Main Mall Vancouver B.C. V6T 1Z4, Canada
Frank K. Ko
Affiliation:
Dept. of Materials Engineering, University of British Columbia, 309-6350 Stores Road Vancouver, B.C. V6T 1Z4, Canada
Get access

Abstract

Developing a durable and scalable transparent conductor (TC) as an electrode with high optical transmission and low sheet resistance is a significant opportunity for enabling next generation solar cell devices. High performance fibrous composite materials based on a carrier polymer with embedded functional nanostructures have the potential to serve as a TC with high surface area that can be deposited by the novel and scalable process of electrospinning. This work presents the development of a fibrous TC, where polyacrylonitrile (PAN) is used as a carrier polymer for multi-walled carbon nanotubes (MWCNT) to create electroactive nanofibers 200-500nm in diameter. Once carbonized, thin layers of this material have a low sheet resistance and high optical transmission. It is shown that in a two stage carbonization process, the second stage temperature of above 700C is the primary factor in establishing a highly conductive material and single layers of nanofibers are typically destabilized at high temperatures. A high performance TC has been developed through optimizing carbonization rates and temperatures to allow for single nanofiber layers fabricated by electrospinning MWCNT/PAN solutions onto quartz. These TCs have been optimized for concentrations of MWCNTs less than 20% volume fraction with well above 90% transmissivity and sheet resistances of between .5-1kohm/square. The required MWCNT loading is well below that for TCs based on random networks of MWCNTs.

Keywords

electrical propertiestransparent conductorfiber
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1323: Symposium C – Advanced Materials Processing for Scalable Solar-Cell Manufacturing , 2011 , mrss11-1323-c03-48
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.“How Long Will it Last?”. New Scientist 194 (2605): 38–39. May 26, 2007.Google Scholar
2. Kalowekamo, J., & Baker, E. (2009). Estimating the manufacturing cost of purely organic solar cells. Solar Energy, 83(8), 1224-1231. Elsevier Ltd. doi:10.1016/j.solener.2009.02.003Google Scholar
3. Glatkowski, et al. ., “ Carbon nanotube transparent electrodes: A case for photovoltaics,” in Photovoltaic Specialists Conference (PVSC), 2009 34th IEEE, pp. 001302–001305, 2010.Google Scholar
4. Green, A. A., & Hersam, M. C. (2008). Colored Semitransparent Conductive Coatings Consisting of Monodisperse Metallic Single-Walled Carbon Nanotubes. Nano Letters, 8(5), 1417–1422. doi:10.1021/nl080302fGoogle Scholar
5. De, S., Lyons, P. E., Sorel, S., Doherty, E. M., King, P. J., Blau, W. J., Nirmalraj, P. N., et al. . (2009). Transparent, Flexible, and Highly Conductive Thin Films Based on Polymer−Nanotube Composites. ACS Nano, 3(3), 714–720. doi:10.1021/nn800858wGoogle Scholar
6. Hellstrom, S. L., Lee, H. W., & Bao, Z. (2009). Polymer-Assisted Direct Deposition of Uniform Carbon Nanotube Bundle Networks for High Performance Transparent Electrodes. ACS Nano, 3(6), 1423–1430. doi:10.1021/nn9002456Google Scholar
7. Ko, F. K., & Yang, H. (2008). Functional Nanofibre: Enabling Material for the Next Generations Smart Textiles. Journal of Fiber Bioengineering and Informatics, 1(2), 81–92. doi:10.3993/jfbi09200801Google Scholar
8. Hou, H., Ge, J. J., Zeng, J., Li, Q., Reneker, D. H., Greiner, A., & Cheng, S. Z. D. (2005). Electrospun Polyacrylonitrile Nanofibers Containing a High Concentration of Well-Aligned Multiwall Carbon Nanotubes. Chemistry of Materials, 17(5), 967–973. doi:10.1021/cm0484955Google Scholar