Hostname: page-component-586b7cd67f-r5fsc Total loading time: 0 Render date: 2024-11-29T09:51:54.205Z Has data issue: false hasContentIssue false
  • English
  • Français

Electroless Deposition and Characterization of Pd Thin Films on Hydrogenated Amorphous Silicon

Published online by Cambridge University Press:  25 February 2011

M. L. Chou ,
N. Manning  and
Haydn Chen
M. L. Chou
Affiliation:
Dept. of Mat. Sci. & Engr. and Materials Research Laboratory, University of Illinois, Urbana, IL 61801
N. Manning
Affiliation:
Dept. of Mat. Sci. & Engr. and Materials Research Laboratory, University of Illinois, Urbana, IL 61801
Haydn Chen
Affiliation:
Dept. of Mat. Sci. & Engr. and Materials Research Laboratory, University of Illinois, Urbana, IL 61801
Get access

Abstract

Electroless palladium thin films have been successfully deposited on hydrogenated amorphous Si from a palladium-ammine bath. The d.c. magnetron reactive sputtered 18% hydrogenated amorphous silicon (a-Si:H) possessed a hydrogen passivated surface, using an activation step prior to the electroless deposition to obtain a film with good uniformity. The specially prepared hypophosphite-based dilute metal ion bath exhibited good stability at low operating temperatures of 35–50 °C. The morphology and microstructure of the Pd aggregates were characterized by scanning transmission electron microscopy (STEM) and energy dispersive x-ray spectroscopy (EDX), while the Pd aggregates and as-deposited films from the citrate and NH3/NH4Cl baths were examined by scanning electron microscopy (SEM). Marked differences in morphology and distribution of the Pd aggregates on activated a-Si:H and c-Si substrates were observed and discussed. The as-deposited films with higher coverage from the NH3/NH4Cl bath were typically more uniform and crack-free, while those from the citrate bath suffered from incorporated hydrogen, resulting in bare spots, microcracks and local a-Si film peeling. Auger Electron Spectroscopy (AES) revealed a higher amount of co-deposited phosphorus in NH3/NH4Cl bath films than citrate bath films.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 202: Symposium C – Evolution of Thin Film and Surface Microstructure , 1990 , 277
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Spear, W.E. and LeComber, P.G., Solid State Commun. 17, 1193 (1975).Google Scholar
[2] Boshin, R., Fengyin, W. and Ming, L., Nippon Kagaku Kaishi, (8), 1593 159 (1987).Google Scholar
[3] Yoshimura, S., Chida, E. and Sato, E., Met. Finish., 84, (10), 39–42 (1986).Google Scholar
[4] Technic Inc. U.S. Patent 4, 673,472.Google Scholar
[5] Modern Electroplating, Edited by F.A. Lowenheim, A Wiley-interscience publication,third edition P739 (1974).Google Scholar
[6] Sergienko, A., U.S. patent 2, 976, 181 (1968).Google Scholar
[7] Rhoda, R.N., Tras. Inst. Met. Fin., 36, 82 (1959).Google Scholar
[8] Pearlstein, F., Met. Fin., 53(8), 59 (1955).Google Scholar
[9] Pearlstein, F.,and Weightman, R. F., Plating, 56, 1158 (1969).Google Scholar
[10] Athavale, S.N. and Todani, M.K., Met. Fin. 23 (1989).Google Scholar
[11] Antler, M., Platinum Metals Rev., 31(1), 13–19 (1987).Google Scholar