Hostname: page-component-586b7cd67f-rdxmf Total loading time: 0 Render date: 2024-11-27T11:27:48.456Z Has data issue: false hasContentIssue false

Electrochemical Properties of Nanocrystalline Y2-xPrxRu2O7 Pyrochlore for Electrodic Application in IT-SOFCS

Published online by Cambridge University Press:  26 February 2011

Chiara Abate
Affiliation:
[email protected], University of Florida, Materials Science and Engineering, 100 Rhines Hall, Gainesville, FL, 32611, United States
Keith Duncan
Affiliation:
[email protected], University of Florida, Materials Science and Engineering, 100 Rhines Hall, Gainesville, FL, 32611, United States
Enrico Traversa
Affiliation:
[email protected], University of Rome, Scienze e Tecnologie Chimiche, via della Ricerca Scientifica, Rome, 00133, Italy
Eric Wachsman
Affiliation:
[email protected], University of Florida, Materials Science and Engineering, 100 Rhines Hall, Gainesville, FL, 32611, United States
Get access

Abstract

Nanocrystalline powders of Y2-xPrxRu2O7 were prepared by a co-precipitation method, and were tested as electrode on ESB and GDC electrolytes by electrochemical impedance spectroscopy in the 300-750°C temperatures range. The electrode polarization was studied as a function of the amount of praseodymium in the cathode material. Both systems, Y2-xPrxRu2O7/ESB and Y2-xPrxRu2O7/GDC, showed a similar variation of the electrode area specific resistance (ASR). Y1.5Pr0.5Ru2O7 cathode material presented the best performance, with ASR value of 0.19 Ωcm2 on ESB and 4.23 Ωcm2 on GDC at 700°C. Furthermore, the change in ASR with the oxygen partial pressure suggested that the rate limiting step is the surface diffusion of the adsorbed oxygen at the electrode surface to the triple-phase boundary. Thus, the low value of resistivity of the Y1.5Pr0.5Ru2O7 in contact with ESB results from a much lower charge transfer resistance compared to the Y2-xPrxRu2O7/GDC system, and a partial solid diffusion at the interface electrode/electrolyte that increases the effective triple phase boundary length. This suggests that Y2-xPrxRu2O7 is a promising material for cathode application in ESB-based electrolyte for intermediate temperature solid oxide fuel cells (IT-SOFCs).

Type
Research Article
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Steele, B.C.H., Solid State Ionics 134, 3 (2000).Google Scholar
2. Wachsman, E. D., J. Eur. Ceram. Soc., 24, 1281 (2004).Google Scholar
3. Edgell, Russell G., Goodenough, John B., Hamnett, Andrew and Naish, Christopher C., J. Chem. Soc., Faraday Trans. I, 79, 893 (1983)Google Scholar
4. Prakash, J., Tryk, D.A., Aldred, W., Yeager, E. B., J. Appl. Electrochem., 29, 1463 (1999).Google Scholar
5. Seo, D.-K. and Whangbo, M-H., J. Solid State Chem., 131, 2 (1997).Google Scholar
6. Abate, C., Duncan, K., Esposito, V., Traversa, E. and Wachsman, E. D., ECS Transactions, 1, [7], 255 (2006).Google Scholar
7. Esposito, V., Traversa, E. and Wachsman, E. D., J. Electrochem. Soc., 152, A2300, (2005).Google Scholar
8. Bae, J.-M. and Steele, B. C. H., J. Electroceram., 3, 37 (1999).Google Scholar
9. Linquette-Mailley, S., Caneiro, A., Djurado, E., Mairesse, G., and Fouletier, J., Solid State Ionics, 107, 191 (1998).Google Scholar
10. Wang, L. S. and Barnett, S. A., Solid State Ionics, 76, 103 (1995).Google Scholar