Hostname: page-component-586b7cd67f-rcrh6 Total loading time: 0 Render date: 2024-11-29T07:42:12.370Z Has data issue: false hasContentIssue false
  • English
  • Français

The Elastic Behavior of Partially-Sintered Materials

Published online by Cambridge University Press:  21 February 2011

David. J. Green ,
Rasto Brezny  and
Chris Nader
David. J. Green
Affiliation:
Ceramic Science and Engineering, Department of Materials Science and Engineering, The Pennsylvania State University, PA 16802, USA.
Rasto Brezny
Affiliation:
Ceramic Science and Engineering, Department of Materials Science and Engineering, The Pennsylvania State University, PA 16802, USA.
Chris Nader
Affiliation:
Ceramic Science and Engineering, Department of Materials Science and Engineering, The Pennsylvania State University, PA 16802, USA.
Get access

Abstract

A simple model is presented for the elastic behavior of a powder compact that has undergone small amounts of sintering. The analysis shows that the elastic constants are sensitive to small changes in the interparticle contact areas. The elastic constants are also shown to be dependent on factors relating to the structure of the powder compact, such as the particle coordination number. It is concluded that such elastic constant measurements are a valuable tool in studying adhesion within compacts, the mechanisms involved in the initial stages of sintering and the characterization of powders.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 119: Symposium F – Adhesions in Solids , 1988 , 43
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Knudsen, F. P., J. Am. Ceram. Soc., 42,376 (1959).Google Scholar
2. Wang, J. C., J. Mater. Sci., 12, 801 (1984).Google Scholar
3. Ashby, M. F., Acta Metall., 22, 275 (1974).Google Scholar
4. Swinkells, F. B. and Ashby, M. F., Acta Metall., 22, 259 (1981).CrossRefGoogle Scholar
5. Prochazka, S. and Coble, R. L., Phys. Sintering, 2, 15 (1970).Google Scholar
6. Wilson, T. L. and Shewmon, P. G., Trans. AIME, 236, 48 (1966).Google Scholar
7. Greskovich, C. and Lay, K. W., J. Am. Ceram. Soc., 55, 142 (1972).Google Scholar
8. Timoshenko, S. P. and Goodier, J. N., Theory of Elasticity, 3rd ed. (McGraw-Hill Book Co., New York, 1970), pp. 403–409.Google Scholar
9. Rice, R. W., in Treatise on Materials Science and Technology, Volume-11, Properties and Microstructure, edited by MacCrone, R. K. (Academic Press, New York, 1977) pp. 199–381.Google Scholar
10. Green, D. J., Nader, C. and Brezny, R., to be presented at the 1988 Annual Meeting of the American Ceramic Society, Cincinnatti, OH, 1988 (unpublished)Google Scholar