Hostname: page-component-78c5997874-xbtfd Total loading time: 0 Render date: 2024-11-09T09:11:44.155Z Has data issue: false hasContentIssue false

Effects of the Surface on Displacement Cascades Produced by Heavy-Ion Irradiation of Ni3Al and Cu3Au

Published online by Cambridge University Press:  15 February 2011

S. Müller
Affiliation:
Hahn-Meitner-Institut Berlin, Glienicker Straße 100, D-14109 Berlin, Germany
M. L. Jenkins
Affiliation:
Department of Materials, University of Oxford, Parks Road, Oxford OXI 3PH, U.K.
C. Abromeit
Affiliation:
Hahn-Meitner-Institut Berlin, Glienicker Straße 100, D-14109 Berlin, Germany
H. Wollenberger
Affiliation:
Hahn-Meitner-Institut Berlin, Glienicker Straße 100, D-14109 Berlin, Germany
Get access

Abstract

Stereo transmission electron microscopy has been used to characterise the distribution in depth of disordered zones and associated dislocation loops in the ordered alloys Ni3Al and Cu3Au after heavy ion irradiation, most extensively for Ni3Al irradiated with 50 keV Ta+ ions at a temperature of 573 K. The Cu3Au specimen was irradiated with 50 keV Ni+ ions at an incident angle of 45° at a temperature of 373 K. In Ni3Al the defect yield, i.e. the probability for a disordered zone to contain a loop was found to be strongly dependent on the depth of the zone in the foil, varying from about 0.7 for near-surface zones to about 0.2 in the bulk. The sizes and shapes of disordered zones were only weakly dependent on depth, except for a small population of zones very near the surface which were strongly elongated parallel to the incident ion beam. In Cu3Au the surface had a smaller but still significant effect on the defect yield. The dependence of the tranverse disordered zone diameter d on ion energy E for Ta+ irradiation of NiA was found to follow a relationship d = k1, E1/α with k, = 2.4 ± 0.4 and α = 3.3 ± 0.4. A similar relationship with the same value of α is valid for a wide variety of incident ion/target combinations found in the literature.

Type
Research Article
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Bui, T. X., Robertson, I. M., Kirk, M. A., Mat. Res. Soc. Symp. Proc. 373 (1995) 63.Google Scholar
2. Jenkins, M. L. and Norton, N.J., Phil. Mag. A 50 (1979) 131.Google Scholar
3. Black, T. J., Jenkins, M. L., English, C. A. and Kirk, M. A., Proc. R. Soc. Lond. A 409 (1987) 177.Google Scholar
4. Jenkins, M. L. and English, C. A., J. of Nucl. Mat. 108 & 109 (1982) 46.Google Scholar
5. Laupheimer, A. and Wilkens, M., phys. stat. sol. (a) 55 (1979) 497.Google Scholar
6. Gao, F. and Bacon, D. J., Phil. Mag. A 71 (1995) 43.Google Scholar
7. Bacon, D. J., Calder, A.F., Gao, F., Kapinos, V.G. and Wooding, S.J., Nucl. Instrum. Meth. B 102 (1995)37.Google Scholar
8. Averback, R. S. and Ghaly, M., Nucl. Instrum. Meth. B 90 (1994) 191.Google Scholar
9. Averback, R. S. and Ghaly, M., J. Appl. Phys. 76 (1994) 3908.Google Scholar
10. Ghaly, M. and Averback, R. S., Phys. Rev. Lett. 72 (1994) 364.Google Scholar
11. Ghaly, M., Averback, R.S., and Diaz de la Rubia, T., Nucl. Instrum. Meth. B 102 (1995) 51.Google Scholar
12. Gao, F. and Bacon, D. J., to appear in Phil. Mag. (1997).Google Scholar
13. Müller, S., Jenkins, M. L., Abromeit, C. and Wollenberger, H., to appear in Phil. Mag. (1997).Google Scholar