Hostname: page-component-cd9895bd7-lnqnp Total loading time: 0 Render date: 2024-12-27T17:04:29.540Z Has data issue: false hasContentIssue false
  • English
  • Français

Effects of Sputter-Deposited LaNiO3 Electrode on the Deposition and Properties of Ferroelectric Thin Films

Published online by Cambridge University Press:  10 February 2011

T. B. Wu ,
J. M. Wu ,
C. M. Wu ,
M. J. Shyu ,
M. S. Chen ,
J. S. Doing  and
C. C. Yang
T. B. Wu
Affiliation:
Department of Materials Science and Engineering, National Tsing Hua University, Hsinchu, Taiwan, Republic of China
J. M. Wu
Affiliation:
Department of Materials Science and Engineering, National Tsing Hua University, Hsinchu, Taiwan, Republic of China
C. M. Wu
Affiliation:
Department of Materials Science and Engineering, National Tsing Hua University, Hsinchu, Taiwan, Republic of China
M. J. Shyu
Affiliation:
Department of Materials Science and Engineering, National Tsing Hua University, Hsinchu, Taiwan, Republic of China
M. S. Chen
Affiliation:
Department of Materials Science and Engineering, National Tsing Hua University, Hsinchu, Taiwan, Republic of China
J. S. Doing
Affiliation:
Department of Materials Science and Engineering, National Tsing Hua University, Hsinchu, Taiwan, Republic of China
C. C. Yang
Affiliation:
Department of Materials Science and Engineering, National Tsing Hua University, Hsinchu, Taiwan, Republic of China
Get access

Abstract

Highly (100)-textured thin film of metallic LaNiO3 (LNO) was grown on the Pt/Ti/SiO2/Si substrates by rf magnetron sputtering at ˜300°C, which was used as a bottom electrode to prepare highly (100)-textured ferroelectric films. Examples on the deposition of PbTiO3, (Pbl−xLax)TiO3, Pb(Zr0.53Ti0.47)O3, Pb[(Mg1/3Nb2/3)1−xTix]O3, and (Ba1−xSrx)TiO3 thin films by rf magnetron sputtering or sol-gel method are shown. A reduction of temperature for perovskite phase formation can be achieved, especially for those difficult to crystallize. The surface roughness of the ferroelectric films is also improved as compared to that of films deposited on conventional Pt electrode. Although the electrical properties of the ferroelectric films are affected by the out-diffusion of LNO when a higher temperature was used in the preparation of the films, under an appropriate processing condition, the highly (100)-textured films can have satisfactory electrical characteristics for application. Moreover, the polarization-fatigue property can be also improved by the use of LNO electrode.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 433: Symposium T – Ferroelectric Thin Films V , 1996 , 169
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Olowolafe, J. O., Jones, R. E. Jr., Cambell, A. C., Hegde, R. I., and Mogab, C. J., J. Appl. Phys., 73, (1993), 1764.Google Scholar
2. Eom, C. B., Rover, R. B. V., Phillips, J. M., Fliming, R. M., Cava, R. J., Marshall, J. H., Werder, D. J., Chen, C. H., and Fork, D. K., Ferroelectric Thin Films III, eds. Mayers, E. R., Tuttle, B. A., Desu, S. B., and Larsen, P. K., Mater. Res. Soc. Symp. Proc., 310, (1993), 145.Google Scholar
3. Vijat, D. P. and Desu, S. B., J. Electrochem. Soc., 140, (1993), 2640.Google Scholar
4. Nakamuna, T., Nakao, Y., Kamisawa, A., and Takasu, H., Jpn. J. Appl. Phys., 33, (1994), 5207.Google Scholar
5. Ramesh, R., Chan, W. K., Wilkens, B., Gilchrist, H., Sands, T., Tarascon, J. M., Keramidas, V. G., Fork, D. K., Lee, J. L., and Safari, A., Appl. Phys. Lett., 61, (1992), 1537.Google Scholar
6. Ku, X. Q., Peng, J. L., Li, Z. Y., Ju, H. L., and Green, R. L., Phys. Rev. B, 48, (1993), 1112.Google Scholar
7. Prasad, K. V. R., Varma, K. B. R., Raju, A. R., Satyalakshmi, K. M., Mallya, R. M., and Hegde, M. S., Appl. Phys. Lett., 63, (1993), 1898.Google Scholar
8. Ichinose, H., Nagano, M., Katsuki, H., and Takagi, H., J. Mater. Sci., 29, (1994), 5115.Google Scholar
9. Yang, C. C., Chen, M. S., Hong, T. J., Wu, C. M., Wu, J. M., and Wu, T. B., Appl. Phys. Lett., 66, (1995), 2643.Google Scholar
10. Shyu, M. J., Hong, T. J., Yang, T. J., and Wu, T. B., Jpn. J. Appl. Phys., 34, (1995), 3647.Google Scholar
11. Chen, M. S., Wu, J. M., and Wu, T. B., Jpn. J. Appl. Phys., 34, (1995), 4870.Google Scholar
12. Shyu, M. J., Hong, T. J., and Wu, T. B., Matter. Lett., 23, (1995), 222.Google Scholar
13. Chen, M. S., Wu, T. B., and Wu, J. M., Appl. Phys. Lett., to be published in March, 1996.Google Scholar
14. Jiang, M. C. and Wu, T. B., J. Mater. Res., 9, (1994), 1879.Google Scholar
15. Lin, L. J. and Wu, T. B., Mater. Lett., 11, (1991), 222.Google Scholar
16. Wu, C. M., Hong, T. J., and Wu, T. B., to be published.Google Scholar
17. Klein, J. D., Yen, A., and Clauson, S. L., Epitaxial Oxide Thin Films and Heterostructure, eds. Fork, D. K., Phillips, J. M., Ramesh, R. and Wolf, R. M., Mater. Res. Soc. Symp. Proc., 341, (1994), 393.Google Scholar