Hostname: page-component-586b7cd67f-dlnhk Total loading time: 0 Render date: 2024-11-26T14:44:11.843Z Has data issue: false hasContentIssue false
  • English
  • Français

Effects of Processing Parameters and Nanofillers on Mechanical and Thermal Properties and Morphology of Impact Modified Poly (lactic acid)

Published online by Cambridge University Press:  10 April 2013

Eda Acik  and
Ulku Yilmazer
Eda Acik
Affiliation:
Department of Chemical Engineering, Middle East Technical University06800, Ankara, Turkey
Ulku Yilmazer
Affiliation:
Department of Chemical Engineering, Middle East Technical University06800, Ankara, Turkey
Get access

Abstract

Ternary nanocomposites of poly (lactic acid) (PLA) were produced by melt blending with two types of elastomers and five types of organoclays to obtain improved mechanical properties such as tensile strength, modulus and impact strength. One of the elastomers is a random copolymer of ethylene and glycidyl methacrylate (E-GMA) and the other one is a random terpolymer of ethylene-butyl acrylate-maleic anhydride (E-BA-MAH). Organically modified montmorillonites (OMMT) were utilized as nanofillers. XRD, DSC, tensile and impact tests were done on the injection molded samples. FTIR, SEM and TEM analyses are still in progress. As preliminary results, thermal analysis showed that the addition of compatibilizers and organoclays does not have a distinct effect on the thermal properties of the composites, and no evidence of nucleation activity of compatibilizers or organoclays was found. For all types of organoclays, the nanocomposites produced with E-GMA exhibited better mechanical properties in comparison to nanocomposites containing E-BA-MAH, especially for the impact strength.

Keywords

compositenanostructuretoughness
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1499: Symposium N – Precision Polymer Materials—Fabricating Functional Assemblies, Surfaces, Interfaces and Devices , 2013 , mrsf12-1499-n05-179
Copyright
Copyright © Materials Research Society 2013

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Bohlmann, G.M., “General Characteristics, Processability, Industrial Applications and Market Evolution of Biodegradable Polymers” in Handbook of Biodegradable Polymers, Rapra Technology Limited (2005).Google Scholar
“Plastics: Determination of Tensile Properties and Test Conditions Moulding and Extrusion Plastics” ISO 527, International Organization for Standardization – Plastics Google Scholar
Oyama, H. T., “Super-tough poly(lactic acid) materials: Reactive blending with ethylene copolymer,” Polymer, 50: 747–751 (2009).CrossRefGoogle Scholar