Hostname: page-component-586b7cd67f-rdxmf Total loading time: 0 Render date: 2024-11-29T08:50:14.788Z Has data issue: false hasContentIssue false
  • English
  • Français

The Effect of the Distribution of Ag in High TC Bi- Compound Superconductors

Published online by Cambridge University Press:  28 February 2011

Alexis S. Nash ,
K. C. Goretta ,
Philip Nash ,
R. B. Poeppel  and
Donglu Shi
Alexis S. Nash
Affiliation:
Marquette University, Milwaukee, WT, 53233
K. C. Goretta
Affiliation:
Argonne National Laboratory, Argonne, IL 60439
Philip Nash
Affiliation:
Illinois Institute of Technology, Chicago, IL 60616
R. B. Poeppel
Affiliation:
Argonne National Laboratory, Argonne, IL 60439
Donglu Shi
Affiliation:
Argonne National Laboratory, Argonne, IL 60439
Get access

Abstract

A series of 4336 Bi‐Sr‐Ca‐Cu oxide samples doped with 1 to 5% metallic Ag was prepared by solid state reaction. The distribution of Ag, the microstructure and the crystal structure of the samples were studied using energy dispersive spectrometry, EDS, scanning electron microscopy, SEM, and x‐ray diffractometry, XRD. Addition of Ag leads to a marked increase in preferred orientation with (001) planes perpendicular to the pressing direction in sintered pellets. The resistivity‐temperature data show an enhanced Tc in Ag‐doped samples under certain conditions. Energy dispersive spectrometry indicates that the dopant mostly segregates to the grain boundaries.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 169: Symposium M – High Temperature Superconductors: Fundamental Properties and Novel Materials Processing , 1989 , 1287
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Ekin, J. W., Adv. Ceram. Mater. 2, 586 (1987).Google Scholar
2 Tarascon, J. M., McKinnon, W. R., Barboux, P., Hwang, D. M., Bagley, B. G., Greene, L. H., and Hull, G. W., Phys. Rev. B38, 8885 (1988).Google Scholar
3 Ramesh, R., Thomas, G., Green, S. M., Mei, Yu, Jiang, C., and Luo, H. L., Appl. Phys. Lett. 53, 1759 (1988).Google Scholar
4 Nash, A. S., Goretta, K. C., and Poeppel, R. B. in Advances in Powder Metallurgy—1989, Proceedings of the 1989 Powder Metallurgy Conference, San Diego, in press.Google Scholar
5 Kingery, W. D., Bowen, H. K and Uhlmann, D. R., Introduction to Ceramics, Wiley Interscience Publishers, New York, 1976, pp. 200‐204.Google Scholar