Hostname: page-component-78c5997874-v9fdk Total loading time: 0 Render date: 2024-11-06T09:03:41.171Z Has data issue: false hasContentIssue false

Effect of Refractory Particles on the Strength of Optical Fibers

Published online by Cambridge University Press:  10 February 2011

D. J. Wissuchek*
Affiliation:
Coming Incorporated, Coming, NY 14831
Get access

Abstract

Silica-clad optical fibers are proof tested in tension at levels of 700 MPa or greater to ensure product quality. The flaws passing proof testing generally are assumed to be ideal; however, some of these flaws are associated with refractory particles that are fully or partially submerged on the silica surface. Residual stresses are generated in the silica due to a thermal expansion mismatch between the particles and the host silica. These stresses can affect the crack growth characteristics and lifetime predictions for silica-clad optical fibers.

Residual stresses around refractory particles are quantified using analytical and finite element models. Zirconia particles generate the highest stresses at low aspect ratios. As aspect ratio increases, materials with higher elastic moduli, such as SiC, generate the highest stress levels. The residual stress fields are incorporated into crack stress intensity relations and their effect on optical fiber strength is evaluated for different refractory materials, particle sizes, and particle aspect ratios. The results are compared to the residual stress fields and stress intensity relations for model flaws created by indentation with diamond pyramids.

Type
Research Article
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Eshelby, J. D., Proc. R. Soc. London Ser A, 241, (1957) p 376 Google Scholar
2. Handbook of Materials Science, Schneider, S. J., Ed., 4 (1980) 30 Google Scholar
3. Ashby, M. F. and Jones, D. R. H., Engineering Materials 1,Cambridge Press, (1981) p 31 Google Scholar
4. Wissuchek, D. J., J. Non-Cryst. Solids, Accepted for publicationGoogle Scholar
5. Glaesemann, G. S., in SPIE vol.2611, ed. by Paul, D. and Yuce, H. (SPIE, Boston, 1995) p 38 Google Scholar
6. Lin, B. and Matthewson, M. J., Phil. Mag. A., 74:5, (1996) p 1235 10.1080/01418619608239723Google Scholar
7. Kurkjian, C.R. and Semjonov, S. L., Electronics Letters, in pressGoogle Scholar
8. Dabbs, T. P. and Lawn, B. R., J. Am. Ceram. Soc. 68:11 (1985) p 563 10.1111/j.1151-2916.1985.tb16156.xGoogle Scholar