Hostname: page-component-78c5997874-s2hrs Total loading time: 0 Render date: 2024-11-06T02:09:33.276Z Has data issue: false hasContentIssue false

Effect of Organoclay’s characteristics during the preparation of complex ternary system PP-EP/EVA/Organoclay.

Published online by Cambridge University Press:  31 January 2012

Olivares M. Yeraldin*
Affiliation:
Centro de Investigación en Química Aplicada, Blvd. Enrique Reyna Hermosillo No. 140
Ramírez V. Eduardo
Affiliation:
Centro de Investigación en Química Aplicada, Blvd. Enrique Reyna Hermosillo No. 140
Sánchez V. Saúl
Affiliation:
Centro de Investigación en Química Aplicada, Blvd. Enrique Reyna Hermosillo No. 140
Get access

Abstract

In this work, the effect of structural characteristics of organomodified clays on the dispersion degree, mechanical and rheological properties of the nanocomposites PP-EP/EVA/nanoclay has been studied. The studied effects were: degree of chemical modification of the clay, length of substitute groups on the surfactant, and the steric effect caused by surfactant structure. The characterization techniques used were Wide Angle X-ray Diffraction (WAXD), Scanning Transmission Electron Microscopy (STEM), Dynamic Mechanical Analysis (DMA), Tensile Test and Capillary Rheometry. Cloisite 6A, 15A and 20A were used to evaluate the first effect. Better intercalation-exfoliation and mechanical properties were obtained when the clay with lower content of surfactant was used (C20A), these results were attributed to a higher saturation of the system. In order to study the second effect, Cloisite 20A and Cloisite 25A were employed. It was found that the bigger initial intergallery space between these nanoclay’s caused by the longer chains in Cloisite 20A, allows the formation of a structure with better intercalated-exfoliated structure. This was confirmed with the observed increase in mechanical properties. Finally, the third effect was studied with Cloisite 10A and 15A. It was clearly seen that only with Cloisite 15A was possible to obtain an intercalated-exfoliated structure. This was attributed to a major steric effect when using C10A than with 15A.

Type
Articles
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Shah, R. K., Hunter, D. L., Paul, D. R. Polymer 2005, 46, 26462662 Google Scholar
2. Zanetti, M., Camino, G., Canavese, D., Morgano, A. B., Lamelas, F. J., Wilkie, C. A. Chem. Mater. 2002, 14, 189193 Google Scholar
3. Mikitaev, A. K., Ligidov, M. Kh., Zaikov, G. E. Polymers, Polymer Blends, Polymer Composites and Filled Polymers: Synthesis, Properties and Applications, Nova Science Publishers, Inc. 2006 Google Scholar
4. Ramírez-Vargas, E., Navarro-Rodríguez, D., Medellín-Rodríguez, F. J., Huerta-Martínez, B. M., Lin, J. S. Polym. Eng. Sci. 2000, 40, 22412250.Google Scholar
5. Ramírez-Vargas, E., Navarro-Rodríguez, D., Medellín-Rodríguez, F. J., Huerta-Martínez, B. M., Lin, J. S. Polym. Eng. Sci. 2000, 40, 22412250.Google Scholar
6. Ramírez-Vargas, E., Medellín-Rodríguez, F. J., Navarro-Rodríguez, D., Ávila-Orta, C. A., Solís-Rosales, S. G., Lin, J. S. Polym. Eng. Sci. 2002, 42, 13501358.Google Scholar
7. Ramírez-Vargas, E. Tesis Doctoral 2000 Google Scholar
8. Valera-Zaragoza, M., Ramírez-Vargas, E., Medellín-Rodríguez, F. J., Huerta Martínez, Polym. Degrad. Stab. 2006, 91, 13191325 Google Scholar
9. Ramírez-Vargas, E., Valera-Zaragoza, M., Sánchez-Valdes, S., Hernández-Valdez, J. S., Ibara-Castillo, F. F. Polym. Bull. 2009, 62, 391403 Google Scholar
10. Zhu, L.; Xanthos, M. J. Appl. Polym. Sci. 2004, 93, 18911899 Google Scholar
11. Sepe, M. P. Dynamic Mechanical Analysis 1998, Plastics Design Library, Estados Unidos Google Scholar