Hostname: page-component-586b7cd67f-t7fkt Total loading time: 0 Render date: 2024-11-23T11:12:38.875Z Has data issue: false hasContentIssue false
  • English
  • Français

Effect of Growth Conditions on Structural and Electrical Properties of Pb(ZrxTi1−x)O3 layers grown by peroxide MBE

Published online by Cambridge University Press:  01 February 2011

Natalia Izyumskaya ,
V. Avrutin ,
X. Gu ,
B. Xiao ,
S. Chevtchenko ,
Lin Zhou ,
David J. Smith ,
J.-G. Yoon  and
H. Morkoc
Natalia Izyumskaya
Affiliation:
[email protected], Virginia Commonwealth University, Department of Electrical and Computer Engineering, 601 W. Main St., Richmond, VA, 23284, United States, (804) 440 6726, (804) 828 4269
V. Avrutin
Affiliation:
[email protected], Virginia Commonwealth University, Department of Electrical and Computer Engineering, Richmond, VA, 23284, United States
X. Gu
Affiliation:
[email protected], Virginia Commonwealth University, Department of Electrical and Computer Engineering, Richmond, VA, 23284, United States
B. Xiao
Affiliation:
[email protected], Virginia Commonwealth University, Department of Electrical and Computer Engineering, Richmond, VA, 23284, United States
S. Chevtchenko
Affiliation:
[email protected], Virginia Commonwealth University, Department of Electrical and Computer Engineering, Richmond, VA, 23284, United States
Lin Zhou
Affiliation:
[email protected], Arizona State University, Deptartment of Physics, Tempe, AZ, 85287, United States
David J. Smith
Affiliation:
[email protected], Arizona State University, Deptartment of Physics, Tempe, AZ, 85287, United States
J.-G. Yoon
Affiliation:
[email protected], Virginia Commonwealth University, Department of Electrical and Computer Engineering, Richmond, VA, 23284, United States
H. Morkoc
Affiliation:
[email protected], Virginia Commonwealth University, Department of Electrical and Computer Engineering, Richmond, VA, 23284, United States
Get access

Abstract

Pb(ZrxTi1−x)O3 (PZT) films were grown by molecular beam epitaxy using hydrogen peroxide as a source of reactive oxygen. Phase composition as well as structural and electrical properties of the films were studied by x-ray diffractometry, scanning and transmission electron microscopy, conductive atomic force microscopy, and electrical (I-V and polarization-field) measurements. The hydrogen peroxide pressure was found to control the phase composition of the films. Excess peroxide leads to PbO inclusions in PZT layers, whereas deficiency results in the TiO2 or the ZrO2 phase. The second-phase inclusions can be responsible for high leakage current in the films. Precise control over the peroxide pressure is imperative for single-phase PZT films with good ferroelectric properties.

Keywords

ferroelectricthin filmmolecular beam epitaxy (MBE)
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1034 , 2007 , 1034-K10-27
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Waser, R., Schneller, T., Horrmann-Eifert, S., and Ehrhart, P., Integrated Ferroelectrics 36, 3 (2001).Google Scholar
2. Morita, T., Wagatsuma, Y., Cho, Y., Morioka, H., and Funakubo, H., and Setter, N., Appl. Phys. Lett. 84, 5094 (2004).Google Scholar
3. Ramesh, R., Aggarwal, S., and Auciello, O., Mater. Sci. Eng. 32, 191 (2001).Google Scholar
4. Kim, D.M., Eom, C.B., Nagarajan, V., Ouyang, J., Ramesh, R., Vaithyanathan, V., and D.Schlom, G., Appl. Phys. Lett. 88, 142905 (2006).Google Scholar
5. Zhu, T.J., Lu, L., and Lai, M.O., Appl. Phys. A 81, 701 (2005).Google Scholar
6. Gu, X., Izyumskaya, N., Avrutin, V., Morkoç, H., Kang, T.D., and Lee, H., Appl. Phys. Lett. 89, 122912 (2006).Google Scholar
7. Izyumskaya, N., Avrutin, V., Gu, Xing, Özgür, Ü., Xiao, Bo, Kang, T.D., Lee, H., and Morkoç, H., in Ferroelectrics and Multiferroics, edited by Gopalan, V., Maria, J-P., Fiebig, M., and Nan, C-W., (Mater. Res. Soc. Symp. Proc. 966E, Warrendale, PA, 2007), 0966-T11-17.Google Scholar
8. Izyumskaya, N., Avrutin, V., Gu, Xing, Özgür, Ü., Kang, T.D., Lee, H., D.Smith, J., and Morkoç, H., ibid, 0966-T07-04.Google Scholar
9. Izyumskaya, N., Avrutin, V., Gu, X., Xiao, B., Chevtchenko, S., Yoon, J.-G., Zhou, H. Morkoç Lin and Smith, David J., Appl. Phys. Lett. 91, 182906 (2007).Google Scholar
10. Chambers, S.A., Wang, C.M., Thevuthasan, S., Droubay, T., McCready, D.E., Lea, A.S., Shutthanandan, V., indisch, C.F. Jr, Thin Solid Films 418, 197 (2002).Google Scholar
11. Theis, C.D., Yeh, J., Schlom, D.G., M.Hawley, E., and Brown, G.W., Thin Solid Films 235, 107 (1998).Google Scholar