Hostname: page-component-78c5997874-xbtfd Total loading time: 0 Render date: 2024-11-20T04:09:55.171Z Has data issue: false hasContentIssue false
  • English
  • Français

The Effect of Erbium Additions on the Solidification Behavior of γ-Tial

Published online by Cambridge University Press:  22 February 2011

B. Timothy Bassler ,
M. V. Kral ,
W. H. Hofmeister  and
R. J. Bayuzick
B. Timothy Bassler
Affiliation:
Vanderbilt University, Dept. of Applied and Engineering Sciences, Box 1593 Station B, Nashville, TN, 37235.
M. V. Kral
Affiliation:
Vanderbilt University, Dept. of Applied and Engineering Sciences, Box 1593 Station B, Nashville, TN, 37235.
W. H. Hofmeister
Affiliation:
Vanderbilt University, Dept. of Applied and Engineering Sciences, Box 1593 Station B, Nashville, TN, 37235.
R. J. Bayuzick
Affiliation:
Vanderbilt University, Dept. of Applied and Engineering Sciences, Box 1593 Station B, Nashville, TN, 37235.
Get access

Abstract

The titanium-aluminum-erbium system has been studied using electromagnetic levitation and ultra high speed imaging in order to quantify the solidification velocity as a function of undercooling. Measurements were made on Ti-60 at% Al alloys with 0.25, 0.5, 1.0, and 2.0 at% Er additions. Boettinger and Aziz1 show that in ordered alloys it is thermodynamically possible at large enough interface velocities, corresponding to large undercoolings, to solidify a disordered phase with the same composition as the liquid. The result of the transition from ordered to disordered solidification is a discontinuity in the relationship between solidification velocity and melt undercooling. The experimental results for the solidification velocity as a function of melt undercooling will be presented and discussed for each alloy.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 364: Symposium L – High-Temperature Ordered Intermetallic Alloys–VI , 1994 , 1011
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1) Boettinger, W.J. and Aziz, M.J., Acta. Metall., Vol. 37, No. 12, pp.3379, 1989.Google Scholar
2) Anderson, C.D., Hofmeister, W.H., and Bayuzick, R.J., Met. Trans. A, 23A, p.2699, 1992.Google Scholar
3) Shao, , Grosdidier, , and Tsakiropoulos, , Scripts Met., Vol. 30, no. 7, p.809, 1994.Google Scholar
4) Hall, and Huang, , Acta Metall., Vol. 38, no. 4, p.539, 1990.Google Scholar
5) Aziz, M.J. and Boettinger, W.J., Acta. Mettal., Vol. 42, No. 2, pp.527, 1994.Google Scholar
6) Bertero, G.A., Hofmeister, W.H., Robinson, M.B., and Bayuzick, R.J., Met. Trans. A, 22A, p.2723, 1991.Google Scholar
7) Krai, M.V., Bassler, B.T., Hofmeister, W.H., and Wittig, J.E., these proceedings.Google Scholar