A ceramic waste form is being developed at Argonne National Laboratory for waste generated during the electrometallurgical treatment of spent nuclear fuel. The waste is generated when fission products are removed from the electrolyte, LiCI-KCl eutectic. The ceramic waste form is a composite, fabricated by hot isostatic pressing a mixture of glass frit and zeolite occluded with fission products and salt. Past work has shown that the normalized release rate (NRR) is less than 1 g/m2d for all elements in a Material Characterization Center-Type 1 (MCC-1) leach test run for 28 days in deionized water at 90°C (363 K). This leach resistance is comparable to that of early Savannah River glasses. We are investigating how leach resistance is affected by changes in the cationic form of zeolite and in the glass composition. Composites were made with three forms of zeolite A and six glasses. We used three-day ASTM C1220–92 (formerly MCC-1) leach tests to screen samples for development purposes only. The leach test results show that the glass composites of zeolites 5A and 4A retain fission products equally well. The loss of cesium is small, varying from 0.1 to 0.5 wt%, while the loss of divalent and trivalent fission products is one or more orders of magnitude smaller. Composites of 5A retain chloride ion better in these short-term screens than 4A and 3A. The more leach resistant composites were made with durable glasses that were rich in silica and poor in alkaline earth oxides. The x-ray diffraction (XRD) results show that a salt phase was absent in the leach resistant composites of 5A and the better glasses but was present in the other composites with poorer leach performance. Thus, the data show that the absence of a salt phase in a composite's XRD pattern corresponds to improved leach resistance. The data also suggest that the interactions between the zeolite and glass depend on the composition of both.