No CrossRef data available.
Article contents
Dual Ion Implantations of Si+As and S+As into GaAs
Published online by Cambridge University Press: 21 February 2011
Abstract
As+ implantation has been used to compensate the As loss during annealing for Si- or S-implanted GaAs. The As+ implantation was at an energy range of 25–100KeV to a dose range of 1012-1015cm−2. The Si+ or S+ implantation was at 150 or 50KeV respectively to the same dose, 27times;1013cm−2. By using the measurements of the Hall effect and sheet resistivity, the activation efficiency and mobility of the dually implanted sample with Si+ and As+ (25KeV, 1×1013cm− 2 ) after TA at 1050°C for 6s increase by 21 and 18% respectively over those of the singly Si-implanted sample after TA at 1100°C for 6s. Those of the dually implanted sample with Si+ and As+ (100KeV, 1×1013cm− 2 ) increase by 63 and 30% respectively over those of the singly Si-implanted sample after FA at 800°C for 30min. Also, the density of SiAs and VGa determined by 20K PL spectra decreases of dually Si- and As-implanted samples. The activation efficiency and mobility of the d8ally implanted sample with S+ and As+ (40KeV, 1×1013cm−2 ) after TA at 1100°C for 12s increase by 17 and 16% respectively over those of the singly Simplanted sample. The annealing behaviour after As+ implantation is discussed.
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 1989