Hostname: page-component-cd9895bd7-dzt6s Total loading time: 0 Render date: 2024-12-27T01:48:30.372Z Has data issue: false hasContentIssue false
  • English
  • Français

Dry and Wet Etch Processes for NiMnSb, LaCaMnO3 and Related Materials

Published online by Cambridge University Press:  10 February 2011

J. Hong ,
J. J. Wang ,
E. S. Lambers ,
J. A. Caballero ,
J. R. Childress ,
S. J. Pearton ,
K. H. Dahmen ,
S. Von Molnar ,
F. J. Cadieu  and
F. Sharifi
J. Hong
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville, FL
J. J. Wang
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville, FL
E. S. Lambers
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville, FL
J. A. Caballero
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville, FL
J. R. Childress
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville, FL
S. J. Pearton
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville, FL
K. H. Dahmen
Affiliation:
Department of Chemistry/MARTECH, Florida State University, Tallahassee, FL
S. Von Molnar
Affiliation:
Department of Physics/MARTECH, Florida State University, Tallahassee, FL
F. J. Cadieu
Affiliation:
Physics Department, Queens College of CUNY, Flushing, NY
F. Sharifi
Affiliation:
Department of Physics, University of Florida, Gainesville, FL
Get access

Abstract

A variety of plasma etching chemistries were examined for patterning NiMnSb Heusler thin films and associated A12O3 barrier layers. Chemistries based on SF6 and Cl2 were all found to provide faster etch rates than pure Ar sputtering. In all cases the etch rates were strongly dependent on both the ion flux and ion energy. Selectivities of ≥20 for NiMnSb over A12O3 were obtained in SF6-based discharges, while selectivities ≤5 were typical in Cl2 and CH4/H2 plasma chemistries. Wet etch solutions of HF/H2O and HNO3/H2SO4/H2O were found to provide reaction-limited etching of NiMnSb that was either non-selective or selective, respectively, to A12O3. In addition we have developed dry etch processes based on Cl2/Ar at high ion densities for patterning of LaCaMnO3 (and SmCo permanent magnet biasing films) for magnetic sensor devices. Highly anisotropie features are produced in both materials, with smooth surface morphologies. In all cases, SiO2 or other dielectric materials must be used for masking since photoresist does not retain its geometrical integrity upon exposure to the high ion density plasma.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 494: Symposium V – Science & Technology of Magnetic Oxides , 1997 , 3
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Baibich, M. N., Broto, J. M., Fert, A., Nguyen Van Dau, F., Petroff, F., Etienne, P., Creuzet, G., Friederich, A. and Chazelas, J., Phys. Rev. Lett. 66, 2472 (1988).Google Scholar
2. von Helmolt, R., Wecker, J., Holzapfel, B., Schultz, L. and Samwer, K., Phys, Rev. Lett. 71, 2331 (1993).Google Scholar
3. Otto, M. J., van Woerden, R. A. M., van der Valk, P. J., Wijngaard, J., van Bruggen, C. F., Hass, C., and Buschow, K. H. J., J. Phys. : Condens. Matter 1, 2341 (1989).Google Scholar
4. Moodera, J. S., Kinder, L.R., Wong, T.M. and Meservey, R., Phys. Rev. Lett. 74, 3273 (1995).Google Scholar
5. Bobo, J. F., Johnson, P. R., Kautzky, M., Mancoff, F. B., Tuncel, E., White, R. L. and Clemens, B. M., J. Appl. Phys., 81 4164 (1997).Google Scholar
6. Caballero, J. A., Petroff, F., Park, Y. D., Cabbibo, A., Morel, R. and Childress, J. R., J. Appl. Phys, 81 2740 (1997).Google Scholar
7. Lee, J. W., Pearton, S. J., Santana, C. J., Mileham, J. R., Lambers, E. S., Abemathy, C. R., Ren, F. and Hobson, W. S., J. Electrochem. Soc. 143 1093 (1996).Google Scholar
8. for a discussion of high density plasmas, see for example High Density Plasma Sources, ed. Popov, O. A. (Noyes Publications, Park Ridge, NJ 1996),Google Scholar
Lieberman, M. A. and Lichtenburg, A. J., Principles of Plasma Discharges and Materials Processing (Wiley and Suns, NY 1994);Google Scholar
Asmussen, J., J. Vac. Sci. Technol. A 7 883 (1989).Google Scholar
9. Chen, F. F., Chapter 1 in High Density Plasma Sources, ed. Popov, O. A. (Noyes Publications, Park Ridge NJ 1996).Google Scholar
10. Davis, R. J. and Wolf, E. D., J. Vac. Sci. Technol. B8 1798 (1990).Google Scholar
11. Lee, J. W. and Pearton, S. J., Semicond. Sci. Technol. 11 812 (1996).Google Scholar
12. Tan, S. S. and Milnes, A. G., Solid State Electron 38 17 (1995).Google Scholar