Hostname: page-component-78c5997874-s2hrs Total loading time: 0 Render date: 2024-11-20T00:51:35.718Z Has data issue: false hasContentIssue false
  • English
  • Français

DLC/Hydroxyapatite Nanocomposites

Published online by Cambridge University Press:  01 February 2011

Roger J. Narayan
Roger J. Narayan*
Affiliation:
School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA 30332–0245, USA
Get access

Abstract

Studies of orthopaedic implant failures have shown that mechanical failure of an implant almost exclusively occurs at the biomaterial-tissue interface. Hydroxyapatite (HA) mimics the behavior of natural bone, and provides a strong, long-lasting adhesive interface between a bone replacement implant and the surrounding tissue. Currently, thin film HA is not commonly used because it contains defects, porosity, and cracks. Delamination of the hydroxyapatite film and formation of hydroxyapatite particles may lead to implant wear and loosening. Furthermore, the coating also acts only as a temporary barrier to ion release from the bulk biomaterial. One method to improve the tribological properties of a bioactive coating is to strengthen the microstructure of the coating through the placement of a DLC (hydrogen-free diamondlike carbon) interlayer. DLC coatings possess properties close to diamond in terms of hardness, atomic smoothness, and chemical inertness. We have developed a diamondlike carbon/HA bilayer, in which the bilayer surface (HA) is bioactive and the interlayer (diamondlike carbon) is biocompatible, wear resistant, and corrosion resistant. We have successfully deposited nanocrystalline hydroxyapatite and DLC films by ablating a hydroxyapatite target and a graphite target using a KrF laser. A novel target design was adopted to incorporate alloying atoms into the films during pulsed laser deposition. These alloying elements possess unique biological properties. Surface morphology was studied using SEM, interfacial structure was studied using TEM, and HA phase microstructure was studied using XRD. The DLC/nanocrystalline HA bilayer material is potentially useful for several orthopedic implant designs.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 795: Symposium U – Thin Films - Stresses and Mechanical Properties X , 2003 , U12.9
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Hayashi, K., Inadome, T., Mashima, T. and Sugioka, Y., J. Biomed. Mater. Res. 27, 557–563 (1993).Google Scholar
2. Dhert, W. J. A., Klein, C. P. A. T., Wolke, J. G. C., van der Velde, E. A., de Groot, K. and Rozing, P. M., J. Biomed. Mater. Res. 25, 1183–1200 (1991).Google Scholar
3. Cotell, C. M., Appl. Surf. Sci. 69, 140–148 (1993).Google Scholar
4. Hayashi, K., Inadome, T., Mashima, T. and Sugioka, Y., J. Biomed. Mater. Res. 27, 557–563 (1993).Google Scholar
5. Venables, J. D., Wernick, J. H., Angus, J. C., Bell, P. M., Cuomo, J. J., DeVries, R. C., Feldman, A., Geis, M. W., Hoover, D. S., and Messier, R., Status and Applications of Diamond and Diamondlike Materials: An Emerging Technology. (National Research Council, Washington DC, 1990) p. 14.Google Scholar
6. Chai, C. S. and Ben-Nissan, B., Journal of Materials Science- Materials in Medicine. 10 (8), 465–469 (1999).Google Scholar
7. Soballe, K., Hansen, E. S., Rasmussen, H. B., and Bunger, C., in Hydroxyapatite Coatings in Orthopaedic Surgery, edited by Geesink, R. G. T. and Manley, M. T., (Raven Press, New York, 1993) p. 107.Google Scholar
8. Ahn, E. S., Gleason, N. J., Ying, J. Y., Abstracts of Papers of the American Chemical Society. 216 (3), 038 3 (1998).Google Scholar