Hostname: page-component-78c5997874-fbnjt Total loading time: 0 Render date: 2024-11-20T02:37:19.905Z Has data issue: false hasContentIssue false
  • English
  • Français

Distribution of Additives in Single-Modified TiO2

Published online by Cambridge University Press:  14 February 2012

Marta A. Gleń  and
Barbara U. Grzmil
Marta A. Gleń
Affiliation:
West Pomeranian University of Technology, Szczecin, Institute of Chemical and Environment engineering, 70-322 Szczecin, Pułaskiego 10, E-mail: [email protected]
Barbara U. Grzmil
Affiliation:
West Pomeranian University of Technology, Szczecin, Institute of Chemical and Environment engineering, 70-322 Szczecin, Pułaskiego 10, E-mail: [email protected]
Get access

Abstract

In the present work the influence of different modifiers, calculated to B2O3, CeO2, Sb2O3, ZnO, and ZrO2, on their distribution in TiO2 is investigated. The phase composition and phase transformation of prepared rutile-TiO2 is determined by the selective leaching method, ICP-AES, XRD and FT-IR techniques. The addition of Sb2O3 to TiO2 has no influence on the anatase–rutile phase transformation, CeO2 and ZrO2 act as inhibitors of the TiO2 phase transformation and the addition of ZnO or B2O3 to TiO2 accelerates rutile formation. It is observed that boron is located in TiO2 in the form of soluble B2O3, zinc partly reacts with titanium forming co-phase TiZn2O4 and antimony addition to TiO2 presumably causing the formation of a co-phase of Sb with Ti. Cerium forms a separate phase, CeO2, and reacts partly with titanium, probably creating co-phase, CexTi(1-x)O2 (for example Ce0.8Ti0.2O2). Zirconium addition in TiO2 forms separate ZrO2 phase and solid solution of Zr with Ti.

Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1373: Symposium S4 – Advanced Structural Materials—2011 , 2012 , imrc-1373-s4-10
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Tayade, R. J., Suriola, P. K., Kulkarni, R. G. and Jasra, R. V., Sci. Technol. Adv. Mater. 8, 455 (2007).Google Scholar
2. Dąbrowski, W., Tymejczyk, A. and Lubkowska, A., Properties and application of titanium dioxide pigments, Chemical Plant “Police” S.A. (Police, 2006).Google Scholar
3. Tolchev, A. V., Pervushin, V. Yu. and Kleshchev, D. G., Russ. J. Appl. Chem. 75, 696 (2002).Google Scholar
4. Ratajska, H., J. Therm. Anal. Calorim. 38, 2109 (1992).Google Scholar
5. Kumar, K. N. P., Scr. Metall. Mater. 32, 873 (1995).Google Scholar
6. Gesenhues, U. and Rentschler, T., Solid State Chem. 143, 210 (1999).Google Scholar
7. Zhang, H. and Banfield, J. F., J. Mater. Res. 15, 437 (2000).Google Scholar
8. Lendzion-Bieluń, Z. and Arabczyk, W.,. Appl. Catal., A 207, 37 (2001).Google Scholar
9. Sheinkman, A. I., Goldshtein, L. M., Turlakov, V. N. and Kleshchev, G. V., Zh. Prikl. Khim. 45, 940 (1972).Google Scholar