Hostname: page-component-78c5997874-v9fdk Total loading time: 0 Render date: 2024-11-19T04:02:57.506Z Has data issue: false hasContentIssue false

Development of Multi-plume and Multi-turn (MPT) PLD for YBCO Coated Conductor

Published online by Cambridge University Press:  01 February 2011

Tomonori Watanabe
Affiliation:
ISTEC-SRL Nagoya Coated Conductor Center, 2-4-1, Mutsuno, Atsuta-ku, Nagoya, 456-8587, Japan
Reiji Kuriki
Affiliation:
ISTEC-SRL Nagoya Coated Conductor Center, 2-4-1, Mutsuno, Atsuta-ku, Nagoya, 456-8587, Japan
Takemi Muroga
Affiliation:
ISTEC-SRL Nagoya Coated Conductor Center, 2-4-1, Mutsuno, Atsuta-ku, Nagoya, 456-8587, Japan
Seiki Miyata
Affiliation:
ISTEC-SRL Nagoya Coated Conductor Center, 2-4-1, Mutsuno, Atsuta-ku, Nagoya, 456-8587, Japan
Akira Ibi
Affiliation:
ISTEC-SRL Nagoya Coated Conductor Center, 2-4-1, Mutsuno, Atsuta-ku, Nagoya, 456-8587, Japan
Yutaka Yamada
Affiliation:
ISTEC-SRL Nagoya Coated Conductor Center, 2-4-1, Mutsuno, Atsuta-ku, Nagoya, 456-8587, Japan
Yuh Shiohara
Affiliation:
ISTEC-SRL, 10-13, Shinonome 1-chome, Koto-ku, Tokyo, 135-0062,Japan
Takeharu Kato
Affiliation:
Japan Fine Ceramics Center, 2-4-1, Mutsuno, Atsuta-ku, Nagoya, 456-8587, Japan
Tsukasa Hirayama
Affiliation:
Japan Fine Ceramics Center, 2-4-1, Mutsuno, Atsuta-ku, Nagoya, 456-8587, Japan
Get access

Abstract

Our multi-plume and multi-turn (MPT) pulsed-laser deposition (PLD) has been improved to accelerate reliable and fast deposition technique of high Ic (critical current) YBCO (YBa2Cu3O7-x) layer for a long coated conductor fabrication, for we increased the number of multi-turn, from three to four, in our multi-plume and multi-turn (MPT) PLD system. This increase of the number of depositing turns achieved high deposition rate corresponded to 75 mm3/h (=1 μm-thick × 10 mm-wide × 7.5 m/h, throughout all 4 turns) for YBCO layer. This four turn (4t)-MPT-PLD also indicated a capability to combine high deposition rate and high Ic. We attained the highest Ic's of 321 A at the tape speed of 3 m/h and 340 A at tape speed of 2 m/h by 4t-MPT-PLD in 10 mm-wide and 10 cm-long samples.

Based on these results, we successfully deposited a 100 m long YBCO layer by 4t-MPT-PLD. This coated conductor had high Ic as high as 159 A, therefore, the multiplication of Ic and length exhibited high value of 15.9 kA·m.

Type
Research Article
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Watanabe, T., Iwai, H., Ibi, A., Muroga, T., Miyata, S., Yamada, Y., Shiohara, Y., Kato, T., and Hirayama, T., “Investigation of Multi-deposition for High Ic YBCO Coated Conductors Prepared by PLD on Self-epitaxial CeO2 Buffers”, IEEE Trans. Appl. Supercond. in press Google Scholar
2 Watanabe, T., Kuriki, R., Iwai, H., Muroga, T., Miyata, S., Ibi, A., Yamada, Y., and Shiohara, Y., “High Rate Deposition by PLD of YBCO Films for Coated Conductors,” IEEE Trans. Appl. Supercond. In press Google Scholar
3 Yamada, Y., Muroga, T., Iwai, H., Izumi, T., and Shiohara, Y., Physica C 392-396, 777 (2003)Google Scholar
4 Muroga, T.. Araki, T., Niwa, T., Iijima, Y., Saitoh, T., Hirabayashi, I., Yamada, Y., and Shiohara, Y., IEEE Trans. Appl. Supercond. 13, 2532 (2003)Google Scholar
5 Muroga, T., Iwai, H., Yamada, Y., Izumi, T., Shiohara, Y., Iijima, Y., Saitoh, T., Kato, T., Sugawara, Y. and Hirayama, T., Physica C 392-396, 796 (2003)Google Scholar
6 Kato, T., Iijima, Y., Muroga, T., Saitoh, T., Hirayama, T., Hirabayashi, I., Yamada, Y., Izumi, T., Shiohara, Y. and Ikuhara, Y., Physica C 392-396, 790 (2003)Google Scholar
7 Watanabe, T., Iwai, H., Muroga, T., Miyata, S., Yamada, Y., Shiohara, Y., Physica C 412-414, 819 (2003)Google Scholar
8 Iwai, H., Muroga, T., Watanabe, T., Miyata, S., Yamada, Y. Shiohara, Y.1, Kato, T., and Hirayama, T., Supercond. Sci. Technol. 17, 496 (2004)Google Scholar