Hostname: page-component-78c5997874-g7gxr Total loading time: 0 Render date: 2024-11-20T00:43:33.157Z Has data issue: false hasContentIssue false

Development of Crystallographic Texture in RF Sputter Deposited CoCrTa/Cr Thin Films

Published online by Cambridge University Press:  03 September 2012

Y. C. Feng
Affiliation:
Department of Materials Science and Engineering, Data Storage System Center, Carnegie Mellon University, Pittsburgh, PA 15213
D. E. Laughlin
Affiliation:
Department of Materials Science and Engineering, Data Storage System Center, Carnegie Mellon University, Pittsburgh, PA 15213
D. N. Lambeth
Affiliation:
Department of Electrical and Computer Engineering, Data Storage System Center, Carnegie Mellon University, Pittsburgh, PA 15213
Get access

Abstract

It is well known that Cr sputtered on glass or NiP/Al substrates has either the (002) or (110) crystallographic texture (depending on the substrate temperature) and that the Co-alloy layers which are deposited on the Cr underlayers have either the (1120) or (1011) textures respectively. However, the dependence of the crystallographic textures on other sputtering parameters is not clear. We report here on the study of the dependence of crystallographic textures of CoCrTa/Cr films on substrate bias. It is found that both Cr (110) and Cr (002) textures can form at elevated temperature, depending on the substrate bias. The development of the crystallographic texture is discussed with a Model. It is also found that the epitaxy of CoCrTa layer depends on the sputtering conditions of both the Cr and the CoCrTa layers. The extrinsic magnetic properties (such as He, S and S*) of thin films with various textures are also presented. By controlling the sputtering procedure, the effects of crystallographic textures on magnetic properties were separated from the effects of film Morphology.

Type
Research Article
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Allen, J. C. and Fisher, R. D., IEEE Trans. Magn., MAG–23, 122 (1987).Google Scholar
2 Fisher, R. D., Allen, J. C. and Pressesky, J. L., IEEE Trans. Magn., MAG–22, 352 (1986).Google Scholar
3 Christner, J. A., Ranjan, R., Peterson, R. L. and Lee, J. I., J. Appl. Phys., 63 (8), 3260 (1988).Google Scholar
4 Hsu, Y., Sivertsen, J. M. and Judy, J. H., IEEE Trans. Magn., MAG–26, 1599 (1990).Google Scholar
5 Ohno, T., Shiroishi, Y., Hishiyama, S., Snzuki, H. and Matsuda, Y., IEEE Trans. Magn., MAG–23, 2809 (1987).Google Scholar
6 Lee, H. J., J. Appl. Phys., 57, 4037 (1985).Google Scholar
7 Duan, S. L., Artman, J.O., Wong, B. and Laughlin, D. E., J. Appl. Phys., 67 (9), 4913 (1990).Google Scholar
8 Feng, Y. C., Laughlin, D. E. and Lambeth, D. N., submited to J. Appl. Phys. Google Scholar
9 Daval, J. and Rabdet, D., IEEE Trans. Magn., MAG-5, 768 (1970).Google Scholar
10 Laughlin, D. E. and Wong, B. Y., IEEE Trans. Magn., MAG–27, 4713 (1991).Google Scholar
11 Shen, Y., Laughlin, D. E. and Lambeth, D. N., IEEE Trans. Magn., MAG–28, 3261 (1992).Google Scholar
12 Thornton, J. A., J. Vac. Sci. Technol., A4 (6), 3059 (1986).Google Scholar
13 Eckertova, L., Physics of Thin Films, p. 130, New York: Plenum Press (1986).Google Scholar
14 Zhu, J. G. and Bertram, H. N., IEEE Trans. Magn., MAG–24, 2706 (1988).Google Scholar