Hostname: page-component-cd9895bd7-fscjk Total loading time: 0 Render date: 2024-12-27T02:33:49.712Z Has data issue: false hasContentIssue false
  • English
  • Français

Development of Al2O3-ZnO/Ca3Co4O9 Module for Thermoelectric Power Generation

Published online by Cambridge University Press:  31 January 2011

Paolo Mele ,
Kaname Matsumoto ,
Takeshi Azuma ,
Keita Kamesawa ,
Saburo Tanaka ,
Jun-Ichiro Kurosaki  and
Koji Miyazaki
Paolo Mele
Affiliation:
[email protected], Kyushu Institute of Technology (KIT), Kitakyushu, Japan
Kaname Matsumoto
Affiliation:
[email protected], Kyushu Institute of Technology (KIT), Kitakyushu, Japan
Takeshi Azuma
Affiliation:
[email protected], Kyushu Institute of Technology (KIT), Kitakyushu, Japan
Keita Kamesawa
Affiliation:
[email protected], Kyushu Institute of Technology (KIT), Kitakyushu, Japan
Saburo Tanaka
Affiliation:
[email protected], Kyushu Institute of Technology (KIT), Kitakyushu, Japan
Jun-Ichiro Kurosaki
Affiliation:
[email protected], Kyushu Institute of Technology (KIT), Kitakyushu, Japan
Koji Miyazaki
Affiliation:
[email protected], Kyushu Institute of Technology (KIT), Kitakyushu, Japan
Get access

Abstract

Pure and Al2O3(2%, 5%, 8%) doped sintered ZnO (n-type) and pure sintered Ca3Co4O9 (p-type) pellets were prepared by conventional solid state synthesis starting from the oxides. The sintered pellets were cut by a diamond saw in a pillar shape (15 mm×5 mm×5 mm) for experimental checks. The best doped sample was 2 % Al2O3 ZnO showing Seebeck coefficient S = -180 mV/K and electrical conductivity σ = 8 S/cm at 400°C, while thermal conductivity κ = 1.8 W/m×K at 600°C. Typical values for Ca3Co4O9 were S = 82.5 mV/K and σ = 125 S/cm at 800°C, while κ = 1.01 W/m×K at 600°C. Several modules fabricated by elements cut from sintered pellets were tested and the best performance was obtained in the module formed by six 2 % Al2O3ZnO/ Ca3Co4O9 couples, that generated an output power P = 300 mV at 500°C (when ΔT = 260°C).

Keywords

oxidethermoelectricitythermal conductivity
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1166: Symposium N – Materials and Devices for Thermal-to-Electric Energy Conversion , 2009 , 1166-N03-23
Copyright
Copyright © Materials Research Society 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1“Harnessing Materials for Energy” Arunachalam, V.S. and Fleischer, E.L., Eds., MRS Bull. 33(4) 2008 pp. 250–477.Google Scholar
2“Harvesting Energy through Thermoelectrics: Power Generation and Cooling”, Tritt, T. M. and Subramanian, M. A., Eds., MRS Bull. 31(3) 2006 pp. 188–229.Google Scholar
3 Snyder, G. J. and Toberer, D. S., Nature Materials 7, 105 (2008).Google Scholar
4 Venkatasubramanian, R., Siivola, E., Colpitts, Th. and O`Quinn, B., Nature 413, 517 (2001).Google Scholar
5 Poudel, B., Hao, Q., Ma, Y., Lan, Y., Minnich, A., Yu, B., Yan, X., Wang, D., Muto, A., Vashaee, D., Chen., X., Liu., J., Dresselhaus., M. S., Chen, G., Ren, Z., Science 320, 634 (2008).Google Scholar
6“Chemistry of the Elements” Greenwood, N. N. and Earnshaw, A. Eds, Pergamon Press Ed., Hong Kong 1989, p 1496 Google Scholar
7 Malakhov, D. V., Inorg. Mat. 30, 1 (1994).Google Scholar
8 Tsubota, T., Ohtaki, M., Eguchi, K., Arai, H, J. Mater. Chem., 7, 85 (1997).Google Scholar
9 Sano, M., Horii, S., Matsubara, I., Funahashi, R., Shikano, M., Shimoyama, J., Kishio, K., Japan. J. Appl. Phys. 42, L198 (2003).Google Scholar
10 Park, K., Ko, K. Y., Seo, W. S., Cho, W. S., Kim, J. G., Kim, J. Y., J. Eur. Ceram Soc. 27, 813 (2007).Google Scholar
11 Funahashi, R., Mikami, M., Mihara, T., Urata, S., Ando, N., J. Appl. Phys. 99, 066117 (2006).Google Scholar