Hostname: page-component-78c5997874-mlc7c Total loading time: 0 Render date: 2024-11-20T02:47:30.224Z Has data issue: false hasContentIssue false
  • English
  • Français

Determining the High-temperature Properties of Thin Films Using Bilayered Cantilevers

Published online by Cambridge University Press:  10 February 2011

H. Tada ,
P. Nieva ,
P. Zavracky ,
I.N. Miaoulis  and
P.Y. Wong
H. Tada
Affiliation:
Thermal Analysis of Materials Processing Laboratory, Tufts University, Medford, MA
P. Nieva
Affiliation:
Microfabrication Laboratory, Northeastern University, Boston, MA
P. Zavracky
Affiliation:
Microfabrication Laboratory, Northeastern University, Boston, MA
I.N. Miaoulis
Affiliation:
Thermal Analysis of Materials Processing Laboratory, Tufts University, Medford, MA
P.Y. Wong
Affiliation:
Thermal Analysis of Materials Processing Laboratory, Tufts University, Medford, MA
Get access

Abstract

High-temperature applications of microelectromechanical systems (MEMS), especially in new temperature sensor designs, require an accurate knowledge of the temperature-dependent thermophysical properties of the materials. Although the measurement of the mechanical properties of materials at room temperature has been widely conducted, the same techniques often cannot be used for high-temperature property measurements. In this study, a new technique was developed to find the thermal expansion coefficient of thin films at high temperatures. Bilayered cantilever beams undergo thermally induced deflection at high temperatures, which can be measured and correlated to material properties. An imaging system was developed for the experimental measurement of the beam curvature for temperatures up to 1000°C. To find the high-temperature property of thin films, a bilayered beam, consisting of polycrystalline silicon and silicon dioxide, was designed such that the change in the property of SiO2 had little effect on the curvature of the beam. Furthermore, numerical analysis showed that the Young's modulus of Si also had negligible effect on the curvature. Therefore, the analytical model for beam curvature was simplified to be only a function of the thermal expansion coefficient of Si layer. Using this model, the thermal expansion coefficient of polycrystalline Si film was determined for temperature range between room temperature and 1000°C. The method can be easily modified to find the Young's modulus of Si, as well as properties of SiO2.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 546: Symposium AA – Materials Science of Microelectromechanical Systems (MEMS)… , 1998 , 39
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Lai, J., Perazzo, T., Shi, Z., and Majumdar, A., Sensors and Actuators A58, 113–119, 1997.Google Scholar
2. Tada, H., Abramson, A. R., Nieva, P., Zavracky, P., Miaoulis, I. N., and Wong, P. Y., to appear inMat. Res. Soc. Symp. Proc. 518, 1998.Google Scholar
3. Obermeier, E., Mat. Res. Soc. Symp. Proc. 444, 39–57, 1997.Google Scholar
4. Vlassak, J.J. and Nix, W.D., J. Mater. Res. 7 (12), 3242–3249, 1992.Google Scholar
5. Ding, X., Ko, W. H., and Mansour, J. M., Sensors and Actuators A21-A23, 866–871, 1990.Google Scholar
6. Howe, R. T. and Muller, R. S., Sensors and Actuators 4, 447–454, 1983.Google Scholar
7. Townsend, P. H., Barnett, D. M., and Brunner, T. A., J. Appl. Phys. 62 (11), 4438–4444, 1987.Google Scholar
8. Hong, S., Weihs, T. P., Bravman, J. C., and Nix, W. D., Mat. Res. Soc. Symp. Proc. 130, 93–98, 1989.Google Scholar
9. Wolf, S. and Tauber, R. N., Silicon Processing for the VLSI Era, Volume 1 - Process Technology (Lattice Press, Sunset Beach, CA, 1986) p. 199.Google Scholar
10. Tshichiya, T., Tabata, O., Sakata, J., and Taga, Y., J. Microelectromechanical Systems, 7 (1), 106–113, 1998.Google Scholar
11. Nieva, P., Zavracky, P. M., Adams, G. G., Tada, H., Abramson, A., Miaoulis, l. N., and Wong, P. Y., accepted for presentation at 5th ASME/JSME Joint Thermal Engineering Conference, San Diego, CA, 1999.Google Scholar
12. Bullis, W. M. and Huff, H. R., in The Encyclopedia of Advanced Materials, Volume 4 edited by Bloor, D., Brooke, R. J., Cahn, R. W., Flemings, M. C., and Mahajan, S. (Elsevier ScienceLtd., Oxford, England, 1994) p. 2491 Google Scholar