Hostname: page-component-586b7cd67f-rdxmf Total loading time: 0 Render date: 2024-11-29T07:32:19.109Z Has data issue: false hasContentIssue false
  • English
  • Français

Damage Accumulation and Thermal Recovery in SrTiO3 Implanted with Au2+ Ions

Published online by Cambridge University Press:  15 February 2011

S. Thevuthasan ,
W. Jiang ,
W.J. Weber  and
D.E. McCready
S. Thevuthasan
Affiliation:
Pacific Northwest National Laboratory, Richland (PNNL), WA 99352, [email protected]
W. Jiang
Affiliation:
Pacific Northwest National Laboratory, Richland (PNNL), WA 99352
W.J. Weber
Affiliation:
Pacific Northwest National Laboratory, Richland (PNNL), WA 99352
D.E. McCready
Affiliation:
Pacific Northwest National Laboratory, Richland (PNNL), WA 99352
Get access

Abstract

Damage accumulation and recovery process have been investigated in single crystal SrTiO3 irradiated with 1.0 MeV Au2+ using in-situ Rutherford Backscattering Spectrometry (RBS) in Channeling geometry. Samples were irradiated at a temperature of 200 K with ion fluences ranging from 5.0×1013 2.5×1014Au2+/cm2 (0.22 – 1.10 dpa at damage peak). Subsequent isochronal annealing experiments were performed to study damage recovery processes up to a maximum temperature of 870 K. At an ion fluence between 2.0–2.5×1014Au2+/cm2 (0.88 – 1.10 dpa), the implanted region, which is just below the surface, becomes amorphous. The recovery processes occur over a broad temperature range, and the damage created by low ion fluences, 5.0×1013 − 1.0×1014 Au2+/cm2, is almost completely recovered after annealing at 870 K.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 540: Symposium N / Microstructural Processes in Irradiated Materials , 1998 , 373
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] White, C.W., Boatner, L.A., Sklad, P.S., McHargue, C.J., Rankin, J., Farlow, G.C., and Aziz, M.J., Nucl. Instr. and Meth. B32 (1988) pp. 11–22.Google Scholar
[2] White, C.W., McHargue, C.J., Sklad, P.S., Boatner, L.A., and Farlow, G.C., Mater. Sci. Rep. 4 (1989) pp. 41–146.Google Scholar
[3] McCallum, J.C., Rankin, J., White, C.W., and Boatner, L.A., Nucl. Instr. and Meth. B46 (1990) pp. 98–101.Google Scholar
[4] Rankin, J., McCallum, J.C., and Boatner, L.A., J. Mater. Res. 7 (1992) pp. 717–724.Google Scholar
[5] Simpson, T.W., Mitchell, I.V., McCallum, J.C., and Boatner, L.A., J. Appl. Phys. 76 (1994) pp. 2711–2718.Google Scholar
[6] Rankin, J., Sheldon, B.W., and Boatner, L.A., J. Mater. Res. 9 (1994)pp. 3113–3120.Google Scholar
[7] Overwijk, M.H.F., Cillessen, J.F.M., Kessener, Y.A.R.R., and Tenner, M.G., Nucl. Instr. and Meth. B91 (1994) pp. 322.326.Google Scholar
[8] Weber, W. J., Thevuthasan, S., Jiang, W., and McCready, D.E., presented at the 11th International Conference on Ion Beam Modification of Materials, Amsterdam, The Netherlands, August 31 – September 4, 1998 (unpublished).Google Scholar
[9] Thevuthasan, S., Jiang, W., and Weber, W.J., in preparation.Google Scholar
[10] Thevuthasan, S., Peden, C.H.F., Engelhard, M.H., Baer, D.R., Herman, G.S., Jiang, W., Liang, Y., and Weber, W.J., Nucl. Instr.Meth. A, (1998) in press.Google Scholar
[11] Feldman, L.C., Mayer, J.W., and Picraux, S.T., Materials Analysis by Ion Channeling, (Academic Press, 1982).Google Scholar