Hostname: page-component-586b7cd67f-t8hqh Total loading time: 0 Render date: 2024-11-23T16:39:03.789Z Has data issue: false hasContentIssue false
  • English
  • Français

Cu Rich Nanostructured Alloys with Enhanced Mechanical Properties

Published online by Cambridge University Press:  01 February 2011

K. G. Georgarakis ,
K. Ota ,
A. LeMoulec ,
F. Charlot ,
A. R. Yavari  and
G. Vaughan
K. G. Georgarakis
Affiliation:
[email protected], Institut National Polytechnique de Grenoble, Euronano, SIMAP-CNRS, 1130 rue de la Piscine, St Martin d'Heres, 38402, France, +33-(0)476826641, +33-(0)476826641
K. Ota
Affiliation:
[email protected], Institut National Polytechnique de Grenoble, Euronano, SIMAP-CNRS, 1130 rue de la Piscine, St Martin d'Heres, 38402, France
A. LeMoulec
Affiliation:
[email protected], Institut National Polytechnique de Grenoble, Euronano, SIMAP-CNRS, 1130 rue de la Piscine, St Martin d'Heres, 38402, France
F. Charlot
Affiliation:
[email protected], Institut National Polytechnique de Grenoble, Euronano, SIMAP-CNRS, 1130 rue de la Piscine, St Martin d'Heres, 38402, France
A. R. Yavari
Affiliation:
[email protected], Institut National Polytechnique de Grenoble, Euronano, SIMAP-CNRS, 1130 rue de la Piscine, St Martin d'Heres, 38402, France
G. Vaughan
Affiliation:
[email protected], European Synchrotron Radiation Facilities, Grenoble, 38042, France
Get access

Abstract

New copper rich alloys with elemental additions of transition metals and group IIIA and IVA elements have been prepared by casting and rapid solidification. The prepared alloys show very interesting microstructures; a thick surface layer with nanocrystalline eutectic like structure, while in the bulk the microstructure is coarser lamellar or dendritic. Their microhardness was found to be exceptionally high for Cu rich alloys, reaching values of 450-550HV. Furthermore, the microhardness of the surface layer is higher than that in the bulk, indicating that these alloys can be considered for a variety of applications including tribological and structural.

Keywords

rapid solidificationnanostructureCu
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1056: Symposium HH – Nanophase and Nanocomposite Materials V , 2007 , 1056-HH08-52
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Cheng, S., Ma, E., Wang, Y.M., Kecskes, L.J, Youssef, K.M., Koch, C.C., Han, K., Acta Mat. 2005. 53: p.1521–1533.Google Scholar
2. Wang, Y.M., Wang, K, Pan, D., Lu, K., Hemker, K.J., Ma, E., Scripta Mater., 2003. 48: p.1581–1586.Google Scholar
3. Gududru, R.K., Murty, K.L., Youssef, K.M., Koch, C.C., Mat. Sci Eng. A, 2007. 463: p.14–21.Google Scholar
4. Kimura, H., Inoue, A., Sasamori, K., Hoshida, H., Haruyama, O., Mat. Trans JIM, 2005. 46: p. 1733–1736.Google Scholar
5. Zhang, L., Meng, L., Liu, J.B., Scripta Mater., 2005. 52: p.587–592.Google Scholar
6. Nagharjuna, Balasubramanian, K., Srama, D.S., J. Mater. Sci., 1999. 49: p.2929–2942.Google Scholar
7. Lu, L., Li, S.X., Lu, K., Scripta Mater., 2001. 45: p.1163–1169.Google Scholar
8. Davis, J.R., editor, ASM specialty handbook: copper and copper alloys, Materials Park, OH: ASM International 2001.Google Scholar
9. J, Bevk., J.P., Harbison and Bell, J., J. Appl. Phys. 1978. 49: p.6031–6038.Google Scholar
10. Spitzig, W. A., Dowing, H.L., Laabs, F.C., Gibson, E.D., Verhoeven, J.D., Metal. Trans. A, 1993. 24: p. 7–14.Google Scholar
11. Tushinsky, L.I., Kovensky, I., Plokhov, A., Sindeyer, V., Reshedko, P., “Coated Metal: Structure and Properties of Metal – Coating Composition”, Springer, Berlin, 2002.Google Scholar
12. Yavari, A.R., Ota, K., Georgarakis, K., LeMoulec, A., Charlot, F., Vaughan, G., Greer, A.L. and Inoue, A, Acta Mater. in press.Google Scholar
13. Inoue, A., Zhang, W., Zhang, T. and Kurosaka, K., J. Non-Crystalline Solids 2002. 304: p.200–209.Google Scholar