Hostname: page-component-78c5997874-4rdpn Total loading time: 0 Render date: 2024-11-20T02:48:39.785Z Has data issue: false hasContentIssue false
  • English
  • Français

Control of Crystal Orientations and Its Electrical Properties of PZT/Ru and PZT/RuO2 Thin Films by MOCVD

Published online by Cambridge University Press:  02 August 2011

Kazuo Shinozaki ,
Akinori Iwasaki ,
Naoki Wakiya  and
Nobuyasu Mizutani
Kazuo Shinozaki
Affiliation:
Department of Metallurgy and Ceramic Science, Tokyo Institute of Technology 2-12-1 Ookayama, Meguro-ku, Tokyo 152-8550, Japan
Akinori Iwasaki
Affiliation:
Department of Metallurgy and Ceramic Science, Tokyo Institute of Technology 2-12-1 Ookayama, Meguro-ku, Tokyo 152-8550, Japan
Naoki Wakiya
Affiliation:
Department of Metallurgy and Ceramic Science, Tokyo Institute of Technology 2-12-1 Ookayama, Meguro-ku, Tokyo 152-8550, Japan
Nobuyasu Mizutani
Affiliation:
Department of Metallurgy and Ceramic Science, Tokyo Institute of Technology 2-12-1 Ookayama, Meguro-ku, Tokyo 152-8550, Japan
Get access

Abstract

Ru and RuO2 thin films were deposited on (100)LaAlO3 (LAO), (100)MgO and (111)Pt/Ir/ SiO2/Si substrates byMOCVD. Pb(Zr,Ti)O3 (PZT) was fabricated on Ru/LAOand RuO2/LAO. Ru thin films deposited at 400°C or higher on LaAlO3 and MgO showed epitaxial (001) crystal orientation. (001) uniaxial Ru was deposited on Pt/Ir/SiO2/Si. RuO2 thin films with (100) orientation were deposited both on LaAlO3 and Pt/Ir/SiO2/Si. (110)-oriented RuO2 thin film was deposited on MgO. Epitaxial RuO2 thin films were deposited on LaAlO3 and MgO at 400°C or higher. The smoothest surfaces and the lowest room-temperature electrical resistivities were obtained at 400°C and 450°C, respectively. The crystal orientations and electrical properties of the PZT thin films deposited on the Ru and RuO2 thin films at 550°C were strongly affected by the crystal orientations and microstructure of the Ru and the RuO2 films. Rhombohedral Pb(Zr0.6Ti0.4)03 thin films deposited on RuO2/LAOand Ru/LAO at 550°C with lower growth rate (1.2nm/min) showed (110) and (001) orientation, respectively. The remanent polarization value (Pr) for (001) PZT on Ru/LAO was ∼70 μC/cm2. (110) PZT on RuO2/LAO showed lower Pr (∼30 μC/cm2), but showed low leakage current (10-9 A/cm2 at 500kV/cm). The dense microstructures and smooth surface structures brought the good leakage characteristics.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 768: Symposium G – Integration of Heterogeneous Thin-Film Materials and Devices , 2003 , G3.8
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Yamada, T., Kiguchi, T., wakiya, N., Shinozaki, K., and Mizutani, N., Mater. Res. Symp. Proc., accepted (2002)Google Scholar
[2] Lu, P., He, S., Li, F.X., and Jia, Q.X., Thin Solid Films, 340, 140–144 (1999).Google Scholar
[3] Jia, Q.X., Wu, X.D., Song, G., and Foltyn, S.R., J.Vac.Sci. Technol., A14 (3), 1107–1110 (1996)Google Scholar
[4] Jia, Q.X., Wu, X.D., Foltyn, S.R., Findikoglu, A.T., and Tiwari, P., Appl. Phys.Lett., 67 (12) 1677–1679 (1995)Google Scholar
[5] Law, C.W., Tong, K.Y., Li, J.H., Li, K., and Poon, M.C., Thin Solid Films, 354, 162–168 (1999)Google Scholar
[6] Al-Shareef, H.N., Bellur, K.R., Auciello, O., and Kingon, A.I., Thin Solid Films, 256, 73–79 (1995)Google Scholar