Hostname: page-component-cd9895bd7-p9bg8 Total loading time: 0 Render date: 2024-12-27T02:16:02.145Z Has data issue: false hasContentIssue false
  • English
  • Français

Comprehensive Mechanical and Tribological Characterization of Ultra-Thin-Films

Published online by Cambridge University Press:  01 February 2011

Norm Gitis ,
Michael Vinogradov ,
Ilja Hermann  and
Suresh Kuiry
Norm Gitis
Affiliation:
[email protected], Center for Tribology, Inc., none, 1715 Dell Ave, Campbell, CA, 95008, United States
Michael Vinogradov
Affiliation:
[email protected], Center for Tribology, Inc., 1715 Dell Ave, Campbell, CA, 95008, United States
Ilja Hermann
Affiliation:
[email protected], Center for Tribology, Inc., 1715 Dell Ave, Campbell, CA, 95008, United States
Suresh Kuiry
Affiliation:
SKuiry @cetr.com, Center for Tribology, Inc., 1715 Dell Ave, Campbell, CA, 95008, United States
Get access

Abstract

Based on recent studies, mechanical and tribological properties such as hardness, Young's modulus, friction, and scratch adhesion strength on various coatings and ultra-thin films are reported. These results were obtained using a Universal Nano+Micro Tester UNMT-1, suitably designed for comprehensive evaluation of mechanical and tribological properties of bulk materials, coatings and thin films. Results indicate that a substrate effect for ultra-thin films is substantial when using conventional static nanoindentation technique, while negligible with an advanced dynamic nano-indentation. Comparative results of hardness and Young's modulus obtained from various techniques are presented. Also, a means to evaluate friction and adhesion strength of thin films is highlighted, using DLC specimens as an example.

Keywords

thin filmhardnessstress/strain relationship
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1049: Symposium AA – Fundamentals of Nanoindentation and Nanotribology IV , 2007 , 1049-AA02-04
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Tabor, D., Phil. Mag., A74 (5), 1207 (1996).Google Scholar
2. Gitis, N., Xiao, J., and Vinogradov, M., J. ASTM Int. STP 1463, 2 (9), 80(2005).Google Scholar
3. Gitis, N., etc., Proc. Int. Joint Trib. Conf., San Diego, IJTC2007-44025 (2007)Google Scholar
4. Oliver, W. and Pharr, G., J. Mat. Res., 19(1), 1(2004); 7, 1564(1992).Google Scholar