Hostname: page-component-78c5997874-t5tsf Total loading time: 0 Render date: 2024-11-09T05:58:21.162Z Has data issue: false hasContentIssue false

Comparison of the Annealing Behavior of Three Cold Rolled (Ti-bearing, Nb-bearing and V-bearing) HSLA Steels

Published online by Cambridge University Press:  30 July 2014

R. Ordonez
Affiliation:
Mechanical Engineering and Materials Science Department, University of Pittsburgh, Pittsburgh, Pennsylvania 15261, USA
A.J. DeArdo
Affiliation:
Mechanical Engineering and Materials Science Department, University of Pittsburgh, Pittsburgh, Pennsylvania 15261, USA Basic Metals Processing Research Institute, Mechanical Engineering and Materials Science Department, University of Pittsburgh, Pittsburgh, Pennsylvania 15261, USA
C. Isaac Garcia
Affiliation:
Mechanical Engineering and Materials Science Department, University of Pittsburgh, Pittsburgh, Pennsylvania 15261, USA
Get access

Abstract

The annealing behavior of three HSLA steels is studied using the combined techniques of EBSD-KAM and Sub-grain Method. These techniques have been successfully used to assess the annealing behavior of AK, IF and other high strength steels. Stored energy maps in the hot band, cold rolled and after annealing are constructed and analyzed. The combined usage of the Sub-grain Method and EBSD-KAM techniques are employed to calculate and compare the evolution of the stored energy and recrystallization behaviour during the annealing of Ti-bearing, Nb-bearing, and V-bearing HSLA steels. Orientation dependent stored energy distribution maps at different annealing stages are constructed and analysed. The results show that the stored energy distribution through the thickness of the samples is not uniform and is independent of the steel composition. Similarly the recrystallization behaviour is strongly related to the initial microstructural condition and particularly to the grain boundary character distribution of the steels.

Type
Articles
Copyright
Copyright © Materials Research Society 2014 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Cottrell, A.H. Theory of dislocations. Progress in Metal Physics, 1953. 4 (Copyright 2004, IEE); p. 205264.Google Scholar
Gordon, P. Trans. AIME, 1955. 203; p. 1043 Google Scholar
Choi, S.-H. and Jin, Y.-S., Evaluation of stored energy in cold-rolled steels from EBSD data. Materials Science & Engineering A (Structural Materials: Properties, Microstructure and Processing), 2004. A371(Copyright 2004, IEE): p. 149–59.Google Scholar
Read, W.T. and Shockley, Dislocation Models of Crystal Grain Boundaries. Physical Review, 1950. 78 (Copyright © 2009 The Americal Physical Society): p. 257.Google Scholar
Oyarzabal, M., Martinez-deGerenu, A., and Guti, I., Effect of stored energy and recovery on the overall recrystallization kinetics of a cold rolled low carbon steel.Google Scholar
Vanderschueren, D., Yoshinaga, N., and Koyoma, K., Recrystallization of Ti IF steel investigated with electron back-scattering pattern (EBSP). ISIJ International, 1996, 36(8); p. 10461054 CrossRefGoogle Scholar
Fang, Chao, Annealing and Precipitation Behavior During Batch Annealing of HSLA Steels, PhD Thesis.Google Scholar
OXFORD Instruments INCA Suite version 4.0, Oxford Instruments, U.K., 2002.Google Scholar
Humphreys, F.J. and Hatherly, M., Recrystallization and Related Annealing Phenomena, Pergamon, Oxford, 1995 Google Scholar
Li, H. et al. ; J Mater Sci (2008) 43:71487156.CrossRefGoogle Scholar