Article contents
A comparison of in situ As doping with ex situ CdCl2 treatment of CdTe solar cells
Published online by Cambridge University Press: 01 February 2011
Abstract
A comparison has been made of MOCVD grown CdTe/CdS solar cells processed either by ex situ annealing with CdCl2 or doping with arsenic, in situ, together with various optional anneals. A materials comparison was made of both routes using Jsc measurements on arrays of gold contacts to the CdTe. The Jsc increased from around 1 mA cm-2 for undoped and unannealed layers to a range of 25-30 mA cm-2 for CdCl2 annealed layers. In situ arsenic doping resulted in Jsc values up to 18 mA cm-2. The annealing characteristics were very different for these films, compared with the CdCl2 annealed films, with annealing at 500°C dramatically reducing the Jsc. Only annealing under nitrogen at 400°C produced an improvement in Jsc and further evidence from SIMS analysis suggests that hydrogen passivation of the arsenic dopant may have a significant effect on the dopant activity.
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 2005
References
- 3
- Cited by