Hostname: page-component-78c5997874-j824f Total loading time: 0 Render date: 2024-11-03T03:34:38.864Z Has data issue: false hasContentIssue false

Combustion for the Synthesis of β-SiC and Diamond/SiC Composite

Published online by Cambridge University Press:  22 February 2011

Rohini Raghunathan
Affiliation:
North Carolina State University, Department of Materials Science and Engineering, Raleigh, NC 27695-7916
Rina Chowdhury
Affiliation:
North Carolina State University, Department of Materials Science and Engineering, Raleigh, NC 27695-7916
Jagdish Narayan
Affiliation:
North Carolina State University, Department of Materials Science and Engineering, Raleigh, NC 27695-7916
Get access

Abstract

Cubic β-SiC was processed under conditions of self-propagating high-temperature synthesis, based on the exothermic reaction between elemental Si and C powders. The set up for the synthesis of SiC using a mixture of Si and C is described. X-Ray and Raman spectroscopy studies were performed to characterize the quality of the β-SiC produced using the new set up. Scanning Electron Microscopy and Transmission Electron Microscopy studies were also carried out to study the mechanism of the formation of β-SiC from the elemental powders. The density of the compact and grain size of the graphite was found to be critical in the formation of the SiC. Diamond seeds were also implanted on the SiC pellet while compaction and this implanted diamond provided the necessary seed for the growth of a thick diamond film. The adhesion of the film is good because of its growth from the implanted diamond. Diamond films were grown on SiC using HFCVD. The quality and the adhesion of the diamond films on SiC were studied using SEM.

Type
Research Article
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Merzhanov, A.G. and Brovinskaya, I.P., Dokl. Chem. 204, 429 (1972)Google Scholar
2. Munir, Z.A. and Anselmi-Tamburini, U., Mat.Sci. Reports 3, 277 (1989)Google Scholar
3. Holt, J.B. and Danmead, S.D., Annual Review of Materials Science 21, 305 (1991).Google Scholar
4. , Pampuch, Lis, J. and Stobierski, L., p.211 in “Combustion andplasma synthesis of high temperature materials” ed. by Munir, Z.A. and Holt, J.B.,UCH, N.Y (1990).Google Scholar
5. Pampuch, R, Walasek, E. and Bailoskorki, Ceramics International, 12, 99 (1986).Google Scholar
6. Pampuch, R., , Bialoskorski and Walasek, E., Ceramics International 13, 63(1987).Google Scholar
7. Yamada, O., Miyamoto, Y., and Koizumi, M., J. Mater. Res., 1, 275 (1986)Google Scholar
8. Kodera, H., Jap. J. Appl. Phys. 2, 212 (1963)Google Scholar
9. Gnesion, G.G. and Raytchenko, A.J., Poroshk. Matall., 5, 35 (1973).Google Scholar