Hostname: page-component-586b7cd67f-rcrh6 Total loading time: 0 Render date: 2024-11-25T17:40:04.919Z Has data issue: false hasContentIssue false
  • English
  • Français

The Collapse or Ballooning Pressure of Thick-Walled Pressure Vessels

Published online by Cambridge University Press:  21 February 2011

B. Crossland
B. Crossland*
Affiliation:
Department of Mechanical. and Industrial Engineering, The Queen's University, The Ashby Institute, Stranmillis Road, Belfast, BT9 5AH, Great Britain.
Get access

Abstract

Discussion of the proposed extension of the ASME pressure vessel code to cover operating pressures up to 1.4 GPa (200000 lbf/in2 ) has generated the proposal that two criteria should be used, of which one would be the collapse or ballooning pressure not the bursting pressure. The present paper examines this proposal in relation to extensive data on the collapse and bursting of thick-walled vessels available to the author.

It is concluded that the collapse pressure is only readily calculable for materials which approach the behaviour of an elastic/perfectly plastic material. It also appears for materials with significant strain hardening characteristics, such as mild steel, that the collapse pressure considerably underestimates the bursting pressure, whereas for a material which behaves as an elastic/perfectly plastic material the collapse pressure is nearly coincident with the bursting pressure. Consequently if the collapse pressure was adopted and if the factor of safety against collapse was adequate for one material it might be more or less than adequate for another material, which would appear to be unacceptable.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 22: Symposium NY – High Pressure in Science and Technology , 1983 , 201
Copyright
Copyright © Materials Research Society 1984

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Manning, W.R.D., Engineering 159, 101–102 and 183–184 (1945).Google Scholar
2. Crossland, B., Proc. Instn. Mech. Engrs. 180 pt. 3A, 243–254 (1965).Google Scholar
3. Crossland, B., WRC Bulletin No. 94 (1964).Google Scholar
4. Crossland, B. and Gaydon, S.A., ASME PVP– 61, 167–179 (1982).Google Scholar
5. Ford, H., Crossland, B. and Watson, E.J., J. PVT 103, 2–9 (1980).Google Scholar
6. Crossland, B. and Kerr, W.F.K., High Temperature-High Pressure 1, 133–152 (1969).Google Scholar
7. Crossland, B. and Bones, J.A., Proc. Instn. Mech. Engrs, 172, 777–804 (1958).Google Scholar