Hostname: page-component-586b7cd67f-rcrh6 Total loading time: 0 Render date: 2024-11-25T17:30:55.613Z Has data issue: false hasContentIssue false
  • English
  • Français

Chemical Interactions of UOP IONSIV IE-911 (CST) with SRS Waste Simulants

Published online by Cambridge University Press:  21 March 2011

May Nyman ,
James L. Krumhansl ,
Carlos Jove-Colon ,
Pengchu Zhang ,
Tina M. Nenoff ,
Thomas J. Headley ,
Yali Su  and
Liyu Li
May Nyman
Affiliation:
Sandia National Laboratories, P.O. Box 5800, MS-0755, Albuquerque, NM 87185-0755.
James L. Krumhansl
Affiliation:
Sandia National Laboratories, P.O. Box 5800, MS-0755, Albuquerque, NM 87185-0755.
Carlos Jove-Colon
Affiliation:
Sandia National Laboratories, P.O. Box 5800, MS-0755, Albuquerque, NM 87185-0755.
Pengchu Zhang
Affiliation:
Sandia National Laboratories, P.O. Box 5800, MS-0755, Albuquerque, NM 87185-0755.
Tina M. Nenoff
Affiliation:
Sandia National Laboratories, P.O. Box 5800, MS-0755, Albuquerque, NM 87185-0755.
Thomas J. Headley
Affiliation:
Sandia National Laboratories, P.O. Box 5800, MS-0755, Albuquerque, NM 87185-0755.
Yali Su
Affiliation:
Pacific Northwest National Laboratory, Richland, WA 99352.
Liyu Li
Affiliation:
Pacific Northwest National Laboratory, Richland, WA 99352.
Get access

Abstract

IE-911 is a bound form of cystalline silicotitanate (CST) that was extensively tested for removing 137Cs from the Savannah River Site (SRS) tank wastes. In some simulant tests, column plugging incidents were observed, which led to thorough investigations to determine the causes and to develop protocols to avoid future plugging incidents. A related problem was the apparent decrease in Cs scavenging capability in some long-term tests. Our studies revealed that the interaction of IE-911 with the highly basic, high ionic strength, SRS average salt simulant could result in precipitation of; 1) poorly crystalline Nb-oxide, or 2) aluminosilicate zeolitic phases. The source for the Nb-oxide precipitate was determined to be a minor impurity phase that is a byproduct of CST manufacturing. The mechanisms of dissolution and re-precipitation of this phase in column pretreatment solution were investigated, and a protocol to rid IE-911 of this impurity was devised. The source material for the aluminosilicate zeolite precipitate was determined to be predominantly from the waste solution rather than the IE-911. Solubility experiments coupled with a thermodynamic analysis provided a protocol to predict when aluminosilicate precipitation will and will not occur. Finally, it was also established that aluminosilicate precipitation on the surfaces of the IE-911 granules could also account for an apparent decrease in equilibrium Kd and decrease in kinetics of Cs sorption.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 713: Symposium JJ – Scientific Basis for Nuclear Waste Management XXV , 2002 , JJ12.4
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Case, J.T.et al., “Evaluation of Alternatives for Salt Waste Processing at the Savannah River Site”, May 31, 2001, Aiken, S.C. Google Scholar
2. Anthony, R.G., Dosch, R.G., and Phillip, C.V., U. S. Patent # 6,110,378, Sandia National Laboratories, August, 2000.Google Scholar
3. Frei, M.et al., “Salt Processing Project Management Review Board Summary Report”, May 24, 2001, Aiken, S.C. Google Scholar
4. Walker, D.D., “Crystalline Silicotitanate Column Plugging Incidents”, Interoffice memorandum SRT-LWP-2000-00136, August 22. 1999, Aiken, S.C. Google Scholar
5. Walker, D.D.et al., “Cesium Removal From Savannah River Site Radioactive Waste Using Crystalline Silicotitanate (IONSIV® IE-911)”, WSRC-TR-99-308, September 18, ‘1999, Aiken, S.C. Google Scholar
6. Welch, T.D., “Hydraulic Performance and Gas Behavior of Tall, Crystalline-Silicotitanate Ion-Exchange Column”, ORNL-TM-99-103, October 1999, Oak Ridge, TN. Google Scholar
7. Kent, T.E., “Proposal for Investigating the Cause of CST Sluicing Difficulties for the ORNL Tall Column System”, March 7, 2001, Oak Ridge, TN.Google Scholar
8. Taylor, P.A. and Mattus, C.H., “Thermal and Chemical Stability of Crystalline Silicotitanate Sorbent”, ORNL-TM-99-233, October 1999, Oak Ridge, TN.Google Scholar
9. Gasteiger, H.A., Frederick, W.J., and Streisel, R.C., Ind. Eng. Chem. Res.. 31, 1183, (1992).Google Scholar
10. Park, H. and Englezos, P., Can. J. Chem. Eng. 76, 915, (1998).Google Scholar
11. Park, H. and Englezos, P., Ind. Eng. Chem. Res. 38, 4959, (1999).Google Scholar
12. Barnes, M.C., Mensah, J.A., and Gerson, A.R., Colloids and Surfaces A: Physicochemical and Engineering Aspects. 157, 101, (1999).Google Scholar
13. Walker, D.D., “Preparation of Simulated Waste Solutions”, WSRC-TR-99-00116, April 15, 1999, Aiken, SC. Google Scholar
14. Baes, C.F. and RMesmer, .E., “The Hydrolysis of Cations”, (John Wiley & Sons, 1976).Google Scholar
15.http://twins.pnl.gov:8001Google Scholar