Hostname: page-component-586b7cd67f-l7hp2 Total loading time: 0 Render date: 2024-11-29T07:30:12.832Z Has data issue: false hasContentIssue false
  • English
  • Français

Characterization of Diamond Like Carbon Thin Coating on Stainless Steel 316 L Through Pulsed DC Technique

Published online by Cambridge University Press:  01 February 2011

E. Rojas  and
F. Maass
E. Rojas
Affiliation:
Departamento de Ingeniería Mecánica, Universidad de Antofagasta, Av. Angamos 601, Antofagasta Chile.
F. Maass
Affiliation:
Departamento de Física, Universidad de Antofagasta, Ave. Angamos 601, Antofagasta Chile. Email: [email protected]
Get access

Abstract

The study focuses on the adhesion and friction coefficient of DLC (Diamond Like Carbon) coating on a metallic surface AISI-316L. A DC technique was used in order to develop DLC coatings, while a silicon interface allowed a better adhesion of those coatings, having variations of time during the deposit to allow different thickness in anchoring coating. The adhesion and friction coefficient were measure through Scratching Test while the sheets were analyzed through Atomic Force Microscope (AFM) to visualize its surface morphology. Besides, it was used Raman spectroscopy to study sp3/sp2 ratio of DLC coatings. The tests show that the sample with the largest period of time of deposit has a better adhesion and the highest surface roughness.

Keywords

AdhesionRaman spectroscopysteelPECVDmorphology
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1275: Structural and Chemical Characterization of Metals, Alloys and Compounds , 2010 , S3-P97
Copyright
Copyright © Materials Research Society 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Sharma, R., Barhai, P.K., Kumari, N. Thin Solid Films, 516, 5397 (2008)Google Scholar
2. Robertson, J., Surf. Coat. Technol. 50, 185 (1992).Google Scholar
3. Liu, Y., Gubisch, M., Haensel, T., Spiess, L., Schaefer, J.A., Tribology International 39, 1584 (2006).Google Scholar
4. Tamor, M. A., Vassell, W.C., J. Appl. Phys. 76, 3823 (1994).Google Scholar
5. Ferrari, A.C., Robertson, J., Phys. Rev. B 61, 14095 (2000).Google Scholar
6. Trava-Airoldi, V. J., Bonetti, L. F., Capote, G., Thin solid Films 516, 272 (2007).Google Scholar
7. Taki, Y., Taki, O., Thin solid Films 316, 45 (1998).Google Scholar