Hostname: page-component-586b7cd67f-dlnhk Total loading time: 0 Render date: 2024-11-27T00:45:18.946Z Has data issue: false hasContentIssue false
  • English
  • Français

Characteristics of Pt/SBT/Al2O3/Si Structures for MFIS-FET Applications

Published online by Cambridge University Press:  21 March 2011

Jae-Hoon Choi ,
Ji-Woong Kim  and
Tae-Sung Oh
Jae-Hoon Choi
Affiliation:
Department of Metallurgical Engineering and Materials Science, Hong Ik University, Seoul 121-791, Korea
Ji-Woong Kim
Affiliation:
Department of Metallurgical Engineering and Materials Science, Hong Ik University, Seoul 121-791, Korea
Tae-Sung Oh
Affiliation:
Department of Metallurgical Engineering and Materials Science, Hong Ik University, Seoul 121-791, Korea
Get access

Abstract

Pt/Sr0.85Bi2.4Ta2O9/Al2O3/Si structures were prepared for MFIS-FET applications. After depositing Al2O3 film of 10-50 nm thickness by reactive sputtering on Si(100) substrate as a buffer layer, Sr0.85Bi2.4Ta2O9 (SBT) thin film of 400 nm thickness was prepared onto it by metalorganic decomposition process. With annealing at 800°C for 1 hour in oxygen ambient, the 400 nm-thick SBT film exhibited 2Pr of 10.2 μC/cm2 and Ec of 37.5 kV/cm at ±5V. C-V characteristics of the Pt/SBT/Al2O3/Si structures exhibited hysteresis loops due to the ferroelectric switching behavior of the SBT film. When the Al2O3 buffer layer was thicker than 10 nm, the memory window and maximum capacitance of the Pt/SBT/Al2O3/Si structure increased with decreasing the thickness of the Al2O3buffer layer, and the Pt/SBT(400 nm)/Al2O3(10 nm)/Si structure exhibited a memory window of 2.2 V at ±5 V.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 666: Symposium F – Transport and Microstructural Phenomena , 2001 , F4.9
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Scott, J. F. and Araujo, C. A. Paz de, Science 246, 1400 (1989).Google Scholar
[2] Scott, J. F., Ferroelectrics Review 1, 85 (1998).Google Scholar
[3] Tokumitsu, E., Takahashi, D., and Ishiwara, H., Jpn. J. Appl. Phys. 39, 5456 (2000).Google Scholar
[4] Kanashima, T., and Okuyama, M., Jpn. J. Appl. Phys. 38, 2044 (1999).Google Scholar
[5] Matsui, Y., Okuyama, M., Noda, M., and hamakawa, Y., Appl. Phys. A28, 161 (1982).Google Scholar
[6] Lee, W. J., Yu, B. G., Lyu, J. S., Lee, J. H., and Kim, B. W., J. Korean Phys. Soc. 35, 509 (1999).Google Scholar
[7] Lee, H. N., Kim, Y. T., and Choh, S. H., J. Korean Phys. Soc. 34, 454 (1999).Google Scholar
[8] Tokumitsu, E., Itani, K., Moon, B., and Ishiwara, H., Jpn. J. Appl. Phys. 34, 5202 (1995).Google Scholar
[9] Park, J. D. and Oh, T. S., J. Korean Phys. Soc. 37, 1072 (2000).Google Scholar
[10] Pande, K. P., Nair, V. K. R., and Gutierrez, D., J. Appl. Phys. 54, 5436 (1983).Google Scholar
[11] Schroder, D. K., Semiconductor Materials and Device Characterization 2nd ed. (John Wiely & Sons, 1998) Chap. 6.Google Scholar
[12] Park, J. D. and Oh, T. S., J. Mater. Sci. Lett. 19, 1693 (2000).Google Scholar
[13] Miller, S. L. and McWhorter, P. J., J. Appl. Phys. 72, 5999 (1992). F4.9.6Google Scholar