Article contents
Channeling Measurements on Deuterium Implanted Silicon
Published online by Cambridge University Press: 28 February 2011
Abstract
The channeling technique has been used to study the lattice location of deuterium ion-implanted into silicon. Compared to earlier measurements by Picraux and Vook, the temperature range has been extended from 30 to 500 K, and the dose has been decreased down to ≃ 8 × 1014 D/cm2. The implantation was performed at 30 K gnd at an energy of 10 keV. The channeling analysis was done using the d(3 He,p)4 He nuclear reaction. Angular scans were measured along the <100>, <110>, <111> axis and the {100}, {110}, {111} planes, Experiments were carried out on the implanted sample (30K) and after annealing to 200 and 500 K. In the as-implanted sample, 80% of the deuterium is located close to the bond center, whereas the remaining 20% is placed at the tetrahedral site. The deuterium sites change after annealing to 200 and 50OK, and the nature of these annealings stages will be discussed.
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 1986
References
REFERENCES
- 10
- Cited by