Hostname: page-component-cd9895bd7-lnqnp Total loading time: 0 Render date: 2024-12-27T23:23:57.045Z Has data issue: false hasContentIssue false

Carrier recombination in InAs/GaAs Quantum Dot and GaInNAs/GaAs Quantum Well LEDs emitting near 1300 nm.

Published online by Cambridge University Press:  11 February 2011

A J Bennett
Affiliation:
Center for Electronic Materials and Devices, Blackett Laboratory, Imperial College, Prince Consort Road, London SW7 2BZ
L Lofgren
Affiliation:
Center for Electronic Materials and Devices, Blackett Laboratory, Imperial College, Prince Consort Road, London SW7 2BZ
P N Stavrinou
Affiliation:
Center for Electronic Materials and Devices, Blackett Laboratory, Imperial College, Prince Consort Road, London SW7 2BZ
C Roberts
Affiliation:
Center for Electronic Materials and Devices, Blackett Laboratory, Imperial College, Prince Consort Road, London SW7 2BZ
R Murray
Affiliation:
Center for Electronic Materials and Devices, Blackett Laboratory, Imperial College, Prince Consort Road, London SW7 2BZ
G Parry
Affiliation:
Center for Electronic Materials and Devices, Blackett Laboratory, Imperial College, Prince Consort Road, London SW7 2BZ
J S Roberts
Affiliation:
EPSRC III-V Semiconductor Central Facility, Dept. of Electronic Engineering, Mappin Street, Sheffield, S1 3JD
Get access

Abstract

We have studied the emission from LEDs based on GaInNAs Quantum Wells (QWs) and InAs Quantum Dots (QDs) as a function of temperature and current. It is found that the carrier loss in GaInNAs QWs is dominated by non-radiative monomolecular and Auger processes resulting in an external quantum efficiency of only 0.08 % at 10 °C and 1000 A cm-2. In contrast, the InAs QDs have a higher external quantum efficiency, peaking at 0.8 % at 10 °C and 5 A cm-2, but this value rapidly decreases as the excited states of the QDs are filled and Auger-like processes become dominant. These results highlight the issues that must be addressed if these materials are to find commercial application: namely, the areal density of QDs must be increased and the material quality of the GaInNAs QWs must be improved.

Type
Research Article
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Ustinov, V. and Zhukov, A., Semicond. Sci. Technol., 15 (2000) 41.Google Scholar
2. Markus, A., Fiore, A., Ganière, J., Oesterle, U., Chen, J., Deveaud, B., Ilegems, M. and Riechert, H., Appl. Phys. Lett, 80 (2002) 911.Google Scholar
3. Higashi, T., Sweeney, S., Phillips, A., Adams, A., O'Reilly, E., Uchida, T. and Fujii, T., IEEE. Phys. Tech. Lett., 11 (1999) 409.Google Scholar
4. Sweeney, S., Phillips, A., Adams, A., O'Reilly, E. and Thijs, P., IEEE. Phys. Tech. Lett., 10 (1998) 1076.Google Scholar
5. Murray, R., Childs, D., Malik, S., Siverns, P., Hartmann, J-M. and Stavrinou, P., Jpn. J. Appl. Phys., 38 (1999) 528.Google Scholar
6. Yalili, J., Stavrinou, P. and Parry, G., Elect. Lett, 38 (2002) 343.Google Scholar
7. O'Reilly, E. and Silver, M., Appl. Phys. Lett., 63 (1993) 3318.Google Scholar
8. Bennett, A., Stavrinou, P., Roberts, C., Murray, R., Parry, G. and Roberts, J., J. Appl. Phys., 92 (2002).Google Scholar
9. Fehse, R., Sweeney, J., Adams, A., O'Reilly, E., Riechert, H., Illek, S. and Ergorov, A., Elect. Lett., 37 (2001) 1518.Google Scholar
10. Shan, W., Walukiewicz, W., Yu, K., Ager, J., Haller, E., Geisz, J., Friedman, D., Olson, J., Kurtz, S., Xin, H. and Tu, C., Phys. Stat. Sol. (b), 223 (2001) 75.Google Scholar
11. Sugawara, M., Mukai, K. and Nakata, Y., Appl. Phys. Lett., 75 (1999) 656 Google Scholar
12.Introduction to Solid State Physics”, Kittel, C., (1986) Wiley.Google Scholar
13. Vurgaftman, I., Mayer, J., Ram-Mohan, L., J. Appl. Phys., 89 (2001) 5815.Google Scholar