Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-23T16:21:45.036Z Has data issue: false hasContentIssue false
  • English
  • Français

<B>In-Situ Characterizarion of Interfaces-Induced Resistivity in Nanometric Dimensions</B>

Published online by Cambridge University Press:  01 February 2011

Hagay Marom  and
Moshe Eizenberg
Hagay Marom
Affiliation:
[email protected], Technion – Israel Institute of Technology, Materials Engineering, Technion City, Haifa, N/A, N/A, Israel
Moshe Eizenberg
Affiliation:
[email protected], Technion – Israel Institute of Technology, Materials Engineering, Technion City, Haifa, N/A, N/A, Israel
Get access

Abstract

To improve the speed of integrated circuits it is highly important to minimize the electrical resistivity of their interconnects. However, as the dimensions of the interconnects approach the mean free path of the electrons, a substantial rise in resistivity occurs due to additional electron scatterings from grain boundaries and interfaces. To investigate the role of interfaces, in-situ resistivity measurements were preformed for thin copper films on which different materials were deposited. The resistivity was monitored before and after the deposition, enabling to observe the changes as a new top interface was created. Among the materials tested, tantalum resulted in the highest resistivity increase. This fact is of special importance since this material and its nitride serve today as the common diffusion barrier for copper metallization. Titanium resulted in a smaller resistivity increase, but still higher than that of a free copper surface in vacuum. The developed approach enables to test the influence of different diffusion barriers on copper resistivity. With the continuously shrinking dimensions of copper interconnects, this factor will have an increasing importance in future technology nodes.

Keywords

Cuelectrical propertiesmetallic conductor
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 914: Symposium F – Materials, Technology and Reliability of Low-k Dielectrics and Copper Interconnects , 2006 , 0914-F06-03
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Steinhogl, W., Schindler, G., Steinlesberger, G. and Engelhardt, M., Phys. Rev. B 66, 75414 (2002).Google Scholar
2 Steinhogl, W., Schindler, G., Steinlesberger, G., Traving, M. and Engelhardt, M., J. Appl. Phys. 97, 23706 (2005).Google Scholar
3 International Technology Roadmap for Semiconductors, Semiconductor Industry Association, 2005, http://public.itrs.net.Google Scholar
4 Marom, H., Ritterband, M. and Eizenberg, M., Thin Solid Films, accepted for publication (2006).Google Scholar
5 Marom, H. and Eizenberg, M., J. Appl. Phys., accepted for publication (2006).Google Scholar
6 Harper, J. M. E., Cabral, C. Jr., Andricacos, P. C., Gignac, L., Noyan, I. C., Rodbell, K. P. and Hu, C. K., J. Appl. Phys. 86, 2516 (1999).Google Scholar
7 Marom, H. and Eizenberg, M., J. Appl. Phys. 96, 3319 (2004).Google Scholar
8 Fuchs, K., Proc. Cambridge Phil. Soc. 34, 110 (1938).Google Scholar
9 Mayadas, A.F. and Shatzkes, M., Phys. Rev. B 1, 1382 (1970).Google Scholar